hexagon logo
Register Sign in
  • Replies 31 replies
  • Subscribers 222 subscribers
  • Views 551 views
  • Users 0 members are here
Options
Related

centers of same feature from 2 different probes - don't match

seppley
About to put in a tech support ticket, but they are slow so.... it is a race to see if you can fix this first.

2mmx30mm probe measure outside cylinder. Then measure the same cylinder with a 4mmX40mm probe. The measured diameters are exactly the same.. but the measured centers are 0.006" different in X and 0.006" different in Y.

this is so not cool, i don't know how long this has been going on or what is causing it. I thought that it was my calibration, so i recalibrated and said "Yes tool has moved" and manually "found" the cal tool just to be on the safe side.... still the same results.

HELP!
Parents
  • Found something!!! in my program, if i put my cursor down on my 2mm probe, and then go to the probe dialog box and click on "Results" it comes up blank! While all the other probes show the results from the previous calibration in theirs!! something is not linked correctly!! any ideas what that is??

    Is the name of this probe made with LETTERS_NUMBERS_UNDERSCORES_ONLY?

    Either way, probably corrupt 2mm probe file. Delete the .PRB file and rebuild from scratch.
Reply
  • Found something!!! in my program, if i put my cursor down on my 2mm probe, and then go to the probe dialog box and click on "Results" it comes up blank! While all the other probes show the results from the previous calibration in theirs!! something is not linked correctly!! any ideas what that is??

    Is the name of this probe made with LETTERS_NUMBERS_UNDERSCORES_ONLY?

    Either way, probably corrupt 2mm probe file. Delete the .PRB file and rebuild from scratch.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement