hexagon logo
Register Sign in
  • Replies 21 replies
  • Subscribers 222 subscribers
  • Views 366 views
  • Users 0 members are here
Options
Related

Help guys!!!! 30pc study and runtime slowdown

Blackbowtie99
Ok here is my question, I have been given the task of running a 30pc study on a rear window of a car. Just explain our plant is an Auto glass supplier for North America. So these rear windows are put on a fixture that checks for curve and bend comparison between the pieces. Once we have a alignment established on the fixture using tooling balls. The glass will be placed on the fixture and ran using pre selected points on the glass surface in CAD so we can compare Nominal vs. Actuals after the run. Is there an easy way to run these 30pcs without separating the 30pcs into 30 different programs and report them separately. By doing it like this we have noticed the more pieces we ran the slower and slower the machine gets. By the time we get to 30th piece the probe may hover above the 1st data point for 3min before it starts running.

Machine: DEA Delta sp
PC-DMIS CAD++2013 MR1 (Release)
Parents
  • Here is a look at our current program from the start. I only copied up to PNT3 because there are about 300 data points total. What we currently do is after the first part is ran we save the program as Piece#1, then we remove the glass and set the next piece on the fixture. Then Execute from PNT1 and let it run the 300pts then save results as Piece#2 We then start with next part on fixture and repeat process for 30pcs. Always going back to PNT1 and re-executing the program for each part.



    STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
    ALIGNMENT/END
    MODE/MANUAL
    MOVESPEED/ 50
    SCANSPEED/50
    FLY/ON,3
    FORMAT/TEXT,OPTIONS,ID,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,DEVANG,OUTTOL,
    LOADPROBE/COMMONTIPS1
    TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=90
    SPH1 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>,12.7
    ACTL/<2057.953,1091.888,-1205.125>,<0.5759247,-0.4573561,0.6775959>,12.721
    TARG/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>
    START ANGLE 1=360,END ANG 1=360
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=25
    SHOW HITS=NO
    SPH2 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0.6755144>,12.7
    ACTL/<940.742,1100.1,-1205.702>,<0.5724445,0.4647447,0.6755144>,12.709
    TARG/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0.6755144>
    START ANGLE 1=0,END ANG 1=0
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=25
    SHOW HITS=NO
    SPH3 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>,12.7
    ACTL/<1553.466,1502.007,-1109.598>,<0.768083,-0.00807,0.6402994>,12.71
    TARG/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>
    START ANGLE 1=0,END ANG 1=0
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=25
    SHOW HITS=NO
    A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/ITERATE
    PNT TARGET RAD=5,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
    MEAS ALL FEAT=NO,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
    LEVEL=SPH1,SPH2,SPH3,,
    ROTATE=SPH1,SPH2,,
    ORIGIN=SPH3,,
    ALIGNMENT/END
    MODE/DCC
    DCSPH1 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>,12.7
    ACTL/<4737.965,-558.101,1528.335>,<0.5759262,-0.4573456,0.6776017>,12.701
    TARG/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>
    START ANGLE 1=360,END ANG 1=360
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CIRCULAR MOVES=YES
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=11,NUMROWS=3
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=275
    SHOW HITS=NO
    DCSPH2 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0.6755144>,12.7
    ACTL/<4738.061,559.139,1527.643>,<0.572441,0.4647552,0.6755101>,12.706
    TARG/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0.6755144>
    START ANGLE 1=366.2,END ANG 1=0
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CIRCULAR MOVES=YES
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=11,NUMROWS=3
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=275
    SHOW HITS=NO
    DCSPH3 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>,12.7
    ACTL/<5087.264,-50.835,1299.203>,<0.7680822,-0.0080588,0.6403006>,12.698
    TARG/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>
    START ANGLE 1=0,END ANG 1=0
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CIRCULAR MOVES=YES
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=11,NUMROWS=3
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=275
    SHOW HITS=NO
    A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
    ALIGNMENT/ITERATE
    PNT TARGET RAD=5,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
    MEAS ALL FEAT=ALWAYS,MAX ITERATIONS=5,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
    LEVEL=DCSPH1,DCSPH2,DCSPH3,,
    ROTATE=DCSPH1,DCSPH2,,
    ORIGIN=DCSPH3,,
    ALIGNMENT/END
    COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
    Remove TBalls and place fixt pins in and glass on fixture to Scan Left Side Aero Strake Area
    MOVESPEED/ 50
    TOUCHSPEED/ 20
    SCANSPEED/50
    PNT1 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
    THEO/<4690.152,-584.118,1551.458>,<0.5360998,-0.5380863,0.6504308>
    ACTL/<4689.996,-583.997,1551.23>,<0.5360998,-0.5380863,0.6504308>
    TARG/<4690.152,-584.118,1551.458>,<0.5360998,-0.5380863,0.6504308>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    VOID DETECTION=NO
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=1.283
    AVOIDANCE MOVE=BOTH,DISTANCE=100
    SHOW HITS=NO
    PNT2 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
    THEO/<4681.571,-595.99,1548.131>,<0.5136647,-0.5814997,0.6308777>
    ACTL/<4681.278,-595.668,1547.769>,<0.5136647,-0.5814997,0.6308777>
    TARG/<4681.571,-595.99,1548.131>,<0.5136647,-0.5814997,0.6308777>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    VOID DETECTION=NO
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=1.283
    AVOIDANCE MOVE=BOTH,DISTANCE=10
    SHOW HITS=NO
    PNT3 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
    THEO/<4674.762,-605.897,1544.032>,<0.4893016,-0.6228706,0.610423>
    ACTL/<4674.542,-605.629,1543.76>,<0.4893016,-0.6228706,0.610423>
    TARG/<4674.762,-605.897,1544.032>,<0.4893016,-0.6228706,0.610423>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    VOID DETECTION=NO
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=1.283
    AVOIDANCE MOVE=BOTH,DISTANCE=10
    SHOW HITS=NO
Reply
  • Here is a look at our current program from the start. I only copied up to PNT3 because there are about 300 data points total. What we currently do is after the first part is ran we save the program as Piece#1, then we remove the glass and set the next piece on the fixture. Then Execute from PNT1 and let it run the 300pts then save results as Piece#2 We then start with next part on fixture and repeat process for 30pcs. Always going back to PNT1 and re-executing the program for each part.



    STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
    ALIGNMENT/END
    MODE/MANUAL
    MOVESPEED/ 50
    SCANSPEED/50
    FLY/ON,3
    FORMAT/TEXT,OPTIONS,ID,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,DEVANG,OUTTOL,
    LOADPROBE/COMMONTIPS1
    TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=90
    SPH1 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>,12.7
    ACTL/<2057.953,1091.888,-1205.125>,<0.5759247,-0.4573561,0.6775959>,12.721
    TARG/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>
    START ANGLE 1=360,END ANG 1=360
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=25
    SHOW HITS=NO
    SPH2 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0.6755144>,12.7
    ACTL/<940.742,1100.1,-1205.702>,<0.5724445,0.4647447,0.6755144>,12.709
    TARG/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0.6755144>
    START ANGLE 1=0,END ANG 1=0
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=25
    SHOW HITS=NO
    SPH3 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>,12.7
    ACTL/<1553.466,1502.007,-1109.598>,<0.768083,-0.00807,0.6402994>,12.71
    TARG/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>
    START ANGLE 1=0,END ANG 1=0
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=5,NUMROWS=2
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=25
    SHOW HITS=NO
    A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
    ALIGNMENT/ITERATE
    PNT TARGET RAD=5,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
    MEAS ALL FEAT=NO,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
    LEVEL=SPH1,SPH2,SPH3,,
    ROTATE=SPH1,SPH2,,
    ORIGIN=SPH3,,
    ALIGNMENT/END
    MODE/DCC
    DCSPH1 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>,12.7
    ACTL/<4737.965,-558.101,1528.335>,<0.5759262,-0.4573456,0.6776017>,12.701
    TARG/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>
    START ANGLE 1=360,END ANG 1=360
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CIRCULAR MOVES=YES
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=11,NUMROWS=3
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=275
    SHOW HITS=NO
    DCSPH2 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0.6755144>,12.7
    ACTL/<4738.061,559.139,1527.643>,<0.572441,0.4647552,0.6755101>,12.706
    TARG/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0.6755144>
    START ANGLE 1=366.2,END ANG 1=0
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CIRCULAR MOVES=YES
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=11,NUMROWS=3
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=275
    SHOW HITS=NO
    DCSPH3 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
    THEO/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>,12.7
    ACTL/<5087.264,-50.835,1299.203>,<0.7680822,-0.0080588,0.6403006>,12.698
    TARG/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>
    START ANGLE 1=0,END ANG 1=0
    START ANGLE 2=0,END ANG 2=90
    ANGLE VEC=<1,0,0>
    SHOW FEATURE PARAMETERS=YES
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CIRCULAR MOVES=YES
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    NUMHITS=11,NUMROWS=3
    SAMPLE HITS=0
    AVOIDANCE MOVE=BOTH,DISTANCE=275
    SHOW HITS=NO
    A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
    ALIGNMENT/ITERATE
    PNT TARGET RAD=5,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
    MEAS ALL FEAT=ALWAYS,MAX ITERATIONS=5,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
    LEVEL=DCSPH1,DCSPH2,DCSPH3,,
    ROTATE=DCSPH1,DCSPH2,,
    ORIGIN=DCSPH3,,
    ALIGNMENT/END
    COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
    Remove TBalls and place fixt pins in and glass on fixture to Scan Left Side Aero Strake Area
    MOVESPEED/ 50
    TOUCHSPEED/ 20
    SCANSPEED/50
    PNT1 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
    THEO/<4690.152,-584.118,1551.458>,<0.5360998,-0.5380863,0.6504308>
    ACTL/<4689.996,-583.997,1551.23>,<0.5360998,-0.5380863,0.6504308>
    TARG/<4690.152,-584.118,1551.458>,<0.5360998,-0.5380863,0.6504308>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    VOID DETECTION=NO
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=1.283
    AVOIDANCE MOVE=BOTH,DISTANCE=100
    SHOW HITS=NO
    PNT2 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
    THEO/<4681.571,-595.99,1548.131>,<0.5136647,-0.5814997,0.6308777>
    ACTL/<4681.278,-595.668,1547.769>,<0.5136647,-0.5814997,0.6308777>
    TARG/<4681.571,-595.99,1548.131>,<0.5136647,-0.5814997,0.6308777>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    VOID DETECTION=NO
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=1.283
    AVOIDANCE MOVE=BOTH,DISTANCE=10
    SHOW HITS=NO
    PNT3 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
    THEO/<4674.762,-605.897,1544.032>,<0.4893016,-0.6228706,0.610423>
    ACTL/<4674.542,-605.629,1543.76>,<0.4893016,-0.6228706,0.610423>
    TARG/<4674.762,-605.897,1544.032>,<0.4893016,-0.6228706,0.610423>
    SNAP=NO
    SHOW FEATURE PARAMETERS=YES
    VOID DETECTION=NO
    SURFACE=THICKNESS_NONE,0
    MEASURE MODE=NOMINALS
    RMEAS=NONE,NONE,NONE
    AUTO WRIST=NO
    CLEARPLANE=NO
    GRAPHICAL ANALYSIS=NO
    FEATURE LOCATOR=NO,NO,""
    SHOW CONTACT PARAMETERS=YES
    SAMPLE METHOD=SAMPLE_HITS
    SAMPLE HITS=0,SPACER=1.283
    AVOIDANCE MOVE=BOTH,DISTANCE=10
    SHOW HITS=NO
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement