Help guys!!!! 30pc study and runtime slowdown

Ok here is my question, I have been given the task of running a 30pc study on a rear window of a car. Just explain our plant is an Auto glass supplier for North America. So these rear windows are put on a fixture that checks for curve and bend comparison between the pieces. Once we have a alignment established on the fixture using tooling balls. The glass will be placed on the fixture and ran using pre selected points on the glass surface in CAD so we can compare Nominal vs. Actuals after the run. Is there an easy way to run these 30pcs without separating the 30pcs into 30 different programs and report them separately. By doing it like this we have noticed the more pieces we ran the slower and slower the machine gets. By the time we get to 30th piece the probe may hover above the 1st data point for 3min before it starts running.

Machine: DEA Delta sp
PC-DMIS CAD++2013 MR1 (Release)

Parents

WolfMan over 11 years ago

I am sure that there are at least 10 more ways to do this, but this is how I usually do it

 STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/MANUAL
MOVESPEED/ 50
SCANSPEED/50
FLY/ON,3
FORMAT/TEXT,OPTIONS,ID,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,DEVANG,OUTTOL, 
LOADPROBE/COMMONTIPS1
TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=90
[COLOR="#0000FF"][COLOR="#800080"]HERE       [/COLOR]=LABEL/[/COLOR]
[COLOR="#FF0000"]C1         =COMMENT/YESNO,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            WOULD YOU LIKE TO PERFORM MANUAL ALIGN?
            IF/C1.INPUT=="YES"[/COLOR]
SPH1 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>,12.7
ACTL/<2057.953,1091.888,-1205.125>,<0.5759247,-0.4573561,0.6775959>,12.721
TARG/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>
START ANGLE 1=360,END ANG 1=360
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=5,NUMROWS=2
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=25
SHOW HITS=NO
SPH2 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0. 6755144>,12.7
ACTL/<940.742,1100.1,-1205.702>,<0.5724445,0.4647447,0.6755144>,12.709
TARG/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0. 6755144>
START ANGLE 1=0,END ANG 1=0
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=5,NUMROWS=2
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=25
SHOW HITS=NO
SPH3 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>,12.7
ACTL/<1553.466,1502.007,-1109.598>,<0.768083,-0.00807,0.6402994>,12.71
TARG/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>
START ANGLE 1=0,END ANG 1=0
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=5,NUMROWS=2
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=25
SHOW HITS=NO
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/ITERATE
PNT TARGET RAD=5,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
MEAS ALL FEAT=NO,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
LEVEL=SPH1,SPH2,SPH3,,
ROTATE=SPH1,SPH2,,
ORIGIN=SPH3,,
ALIGNMENT/END
[COLOR="#FF0000"]END_IF/[/COLOR]
MODE/DCC
DCSPH1 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>,12.7
ACTL/<4737.965,-558.101,1528.335>,<0.5759262,-0.4573456,0.6776017>,12.701
TARG/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>
START ANGLE 1=360,END ANG 1=360
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=YES
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=11,NUMROWS=3
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=275
SHOW HITS=NO
DCSPH2 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0. 6755144>,12.7
ACTL/<4738.061,559.139,1527.643>,<0.572441,0.4647552,0. 6755101>,12.706
TARG/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0. 6755144>
START ANGLE 1=366.2,END ANG 1=0
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=YES
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=11,NUMROWS=3
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=275
SHOW HITS=NO
DCSPH3 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>,12.7
ACTL/<5087.264,-50.835,1299.203>,<0.7680822,-0.0080588,0.6403006>,12.698
TARG/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>
START ANGLE 1=0,END ANG 1=0
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=YES
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=11,NUMROWS=3
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=275
SHOW HITS=NO
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/ITERATE
PNT TARGET RAD=5,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
MEAS ALL FEAT=ALWAYS,MAX ITERATIONS=5,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
LEVEL=DCSPH1,DCSPH2,DCSPH3,,
ROTATE=DCSPH1,DCSPH2,,
ORIGIN=DCSPH3,,
ALIGNMENT/END
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
Remove TBalls and place fixt pins in and glass on fixture to Scan Left Side Aero Strake Area 
MOVESPEED/ 50
TOUCHSPEED/ 20
SCANSPEED/50
PNT1 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
THEO/<4690.152,-584.118,1551.458>,<0.5360998,-0.5380863,0.6504308>
ACTL/<4689.996,-583.997,1551.23>,<0.5360998,-0.5380863,0.6504308>
TARG/<4690.152,-584.118,1551.458>,<0.5360998,-0.5380863,0.6504308>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=1.283
AVOIDANCE MOVE=BOTH,DISTANCE=100
SHOW HITS=NO
PNT2 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
THEO/<4681.571,-595.99,1548.131>,<0.5136647,-0.5814997,0.6308777>
ACTL/<4681.278,-595.668,1547.769>,<0.5136647,-0.5814997,0.6308777>
TARG/<4681.571,-595.99,1548.131>,<0.5136647,-0.5814997,0.6308777>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=1.283
AVOIDANCE MOVE=BOTH,DISTANCE=10
SHOW HITS=NO
PNT3 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
THEO/<4674.762,-605.897,1544.032>,<0.4893016,-0.6228706,0.610423>
ACTL/<4674.542,-605.629,1543.76>,<0.4893016,-0.6228706,0.610423>
TARG/<4674.762,-605.897,1544.032>,<0.4893016,-0.6228706,0.610423>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=1.283
AVOIDANCE MOVE=BOTH,DISTANCE=10
SHOW HITS=NO
[COLOR="#FF0000"]C2         =COMMENT/YESNO,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            IS THIS IS YOUR LAST PART?[/COLOR]
           [COLOR="#0000FF"] IF/C2.INPUT=="NO"[/COLOR]
          [COLOR="#FF0000"]  GOTO/HERE[/COLOR]
           [COLOR="#0000FF"] END_IF/[/COLOR]

Reply

WolfMan over 11 years ago

I am sure that there are at least 10 more ways to do this, but this is how I usually do it

 STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/MANUAL
MOVESPEED/ 50
SCANSPEED/50
FLY/ON,3
FORMAT/TEXT,OPTIONS,ID,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,DEVANG,OUTTOL, 
LOADPROBE/COMMONTIPS1
TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=90
[COLOR="#0000FF"][COLOR="#800080"]HERE       [/COLOR]=LABEL/[/COLOR]
[COLOR="#FF0000"]C1         =COMMENT/YESNO,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            WOULD YOU LIKE TO PERFORM MANUAL ALIGN?
            IF/C1.INPUT=="YES"[/COLOR]
SPH1 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>,12.7
ACTL/<2057.953,1091.888,-1205.125>,<0.5759247,-0.4573561,0.6775959>,12.721
TARG/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>
START ANGLE 1=360,END ANG 1=360
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=5,NUMROWS=2
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=25
SHOW HITS=NO
SPH2 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0. 6755144>,12.7
ACTL/<940.742,1100.1,-1205.702>,<0.5724445,0.4647447,0.6755144>,12.709
TARG/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0. 6755144>
START ANGLE 1=0,END ANG 1=0
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=5,NUMROWS=2
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=25
SHOW HITS=NO
SPH3 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>,12.7
ACTL/<1553.466,1502.007,-1109.598>,<0.768083,-0.00807,0.6402994>,12.71
TARG/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>
START ANGLE 1=0,END ANG 1=0
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=5,NUMROWS=2
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=25
SHOW HITS=NO
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/ITERATE
PNT TARGET RAD=5,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
MEAS ALL FEAT=NO,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
LEVEL=SPH1,SPH2,SPH3,,
ROTATE=SPH1,SPH2,,
ORIGIN=SPH3,,
ALIGNMENT/END
[COLOR="#FF0000"]END_IF/[/COLOR]
MODE/DCC
DCSPH1 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>,12.7
ACTL/<4737.965,-558.101,1528.335>,<0.5759262,-0.4573456,0.6776017>,12.701
TARG/<4737.96,-558.183,1528.332>,<0.5759247,-0.4573561,0.6775959>
START ANGLE 1=360,END ANG 1=360
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=YES
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=11,NUMROWS=3
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=275
SHOW HITS=NO
DCSPH2 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0. 6755144>,12.7
ACTL/<4738.061,559.139,1527.643>,<0.572441,0.4647552,0. 6755101>,12.706
TARG/<4738.061,558.933,1527.65>,<0.5724445,0.4647447,0. 6755144>
START ANGLE 1=366.2,END ANG 1=0
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=YES
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=11,NUMROWS=3
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=275
SHOW HITS=NO
DCSPH3 =FEAT/CONTACT/SPHERE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>,12.7
ACTL/<5087.264,-50.835,1299.203>,<0.7680822,-0.0080588,0.6403006>,12.698
TARG/<5087.207,-50.834,1299.204>,<0.768083,-0.00807,0.6402994>
START ANGLE 1=0,END ANG 1=0
START ANGLE 2=0,END ANG 2=90
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=YES
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CIRCULAR MOVES=YES
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
NUMHITS=11,NUMROWS=3
SAMPLE HITS=0
AVOIDANCE MOVE=BOTH,DISTANCE=275
SHOW HITS=NO
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/ITERATE
PNT TARGET RAD=5,START LABEL=,FIXTURE TOL=0,ERROR LABEL=
MEAS ALL FEAT=ALWAYS,MAX ITERATIONS=5,LEVEL AXIS=ZAXIS,ROTATE AXIS=XAXIS,ORIGIN AXIS=YAXIS
LEVEL=DCSPH1,DCSPH2,DCSPH3,,
ROTATE=DCSPH1,DCSPH2,,
ORIGIN=DCSPH3,,
ALIGNMENT/END
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
Remove TBalls and place fixt pins in and glass on fixture to Scan Left Side Aero Strake Area 
MOVESPEED/ 50
TOUCHSPEED/ 20
SCANSPEED/50
PNT1 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
THEO/<4690.152,-584.118,1551.458>,<0.5360998,-0.5380863,0.6504308>
ACTL/<4689.996,-583.997,1551.23>,<0.5360998,-0.5380863,0.6504308>
TARG/<4690.152,-584.118,1551.458>,<0.5360998,-0.5380863,0.6504308>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=1.283
AVOIDANCE MOVE=BOTH,DISTANCE=100
SHOW HITS=NO
PNT2 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
THEO/<4681.571,-595.99,1548.131>,<0.5136647,-0.5814997,0.6308777>
ACTL/<4681.278,-595.668,1547.769>,<0.5136647,-0.5814997,0.6308777>
TARG/<4681.571,-595.99,1548.131>,<0.5136647,-0.5814997,0.6308777>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=1.283
AVOIDANCE MOVE=BOTH,DISTANCE=10
SHOW HITS=NO
PNT3 =FEAT/CONTACT/SURFACE POINT/DEFAULT,CARTESIAN
THEO/<4674.762,-605.897,1544.032>,<0.4893016,-0.6228706,0.610423>
ACTL/<4674.542,-605.629,1543.76>,<0.4893016,-0.6228706,0.610423>
TARG/<4674.762,-605.897,1544.032>,<0.4893016,-0.6228706,0.610423>
SNAP=NO
SHOW FEATURE PARAMETERS=YES
VOID DETECTION=NO
SURFACE=THICKNESS_NONE,0
MEASURE MODE=NOMINALS
RMEAS=NONE,NONE,NONE
AUTO WRIST=NO
CLEARPLANE=NO
GRAPHICAL ANALYSIS=NO
FEATURE LOCATOR=NO,NO,""
SHOW CONTACT PARAMETERS=YES
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=1.283
AVOIDANCE MOVE=BOTH,DISTANCE=10
SHOW HITS=NO
[COLOR="#FF0000"]C2         =COMMENT/YESNO,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO,
            IS THIS IS YOUR LAST PART?[/COLOR]
           [COLOR="#0000FF"] IF/C2.INPUT=="NO"[/COLOR]
          [COLOR="#FF0000"]  GOTO/HERE[/COLOR]
           [COLOR="#0000FF"] END_IF/[/COLOR]

Children

No Data