hexagon logo
Register Sign in
  • Replies 32 replies
  • Subscribers 223 subscribers
  • Views 522 views
  • Users 0 members are here
Options
Related

Need help!!! Need Out Of Tol warning pop-up

daberger
I have been having an issue with our night shift operators that cant seem to read their reports before sending them along to the next op. AngryAngryAngryAngry This is the 3rd time that parts have been sent back because a bad report was sent to a customer. Each group that is returned has to be 100% inspected, costing 20+ hours of inspection time. This has got to stop. I was wondering if there was a way to make a dialog box pop up if a dimension registers out of tolerance. Anything would help!

I greatly appreciate any help.
Parents
  • You could also include an output to a text file to log when a part is ran OOT.

    or have an email be sent out as a result.

    Or use the Notifications in PC-DMIS 2015 to control power to the CMM...
    (OK, it's not directly possible to control power, but as the Notifications can control a flashing light, it could as well control a relay for the power)
Reply
  • You could also include an output to a text file to log when a part is ran OOT.

    or have an email be sent out as a result.

    Or use the Notifications in PC-DMIS 2015 to control power to the CMM...
    (OK, it's not directly possible to control power, but as the Notifications can control a flashing light, it could as well control a relay for the power)
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement