I am having issue with a stubborn error message "Command Argument Out of Limit"
The program errored out with a similar message in the Z (which was odd because the part was moving X-Y at 90, 90). So I recalibrated probe and received the same message after the head rotated from 90, -90 to 90, 90.
After a machine restart, the error is coming up after homing the machine and cannot do anything else.
Check your parameter settings. For some reason the "Low force:" had been changed to 0.0 N. I changed it back to 0.06 N, as it was originally set.
Not sure if this is your problem BCB, but give your
probe parameter settings a look. Maybe reset them to default. All I know is that my machine seems to be running smoothly again. Thank God.
Check your parameter settings. For some reason the "Low force:" had been changed to 0.0 N. I changed it back to 0.06 N, as it was originally set.
Not sure if this is your problem BCB, but give your
probe parameter settings a look. Maybe reset them to default. All I know is that my machine seems to be running smoothly again. Thank God.
hye. i'm not sure you are going to read this or not.
i encounter this problem. checked the 'low force' value and it's 0.06N.
i don't have idea what's the problem. Can't fix it