I am having issue with a stubborn error message "Command Argument Out of Limit"
The program errored out with a similar message in the Z (which was odd because the part was moving X-Y at 90, 90). So I recalibrated probe and received the same message after the head rotated from 90, -90 to 90, 90.
After a machine restart, the error is coming up after homing the machine and cannot do anything else.
Your probe files must have been created with an older version of the software and are now being opened in a newer version. If you have a specific need to retain backwards compatibility then you can say "No" to that but in general I would think you will want to say "Yes".
An example of when you might want to say "No" is when you are creating the probe files offline using a very recent version of PcDMIs but want to copy those files over to a number of different machines that have older versions of PCDMIS on them.
Your probe files must have been created with an older version of the software and are now being opened in a newer version. If you have a specific need to retain backwards compatibility then you can say "No" to that but in general I would think you will want to say "Yes".
An example of when you might want to say "No" is when you are creating the probe files offline using a very recent version of PcDMIs but want to copy those files over to a number of different machines that have older versions of PCDMIS on them.