TP with nominal angle. HELP

jure1992 over 8 years ago

Hello all.

I have one problem with reporting TP which have for nominal an angle and distance.
is this even possible in PC-DMIS?
In the attach photo you can see what is the problem.
Datum A is circle, B is frontal plane and C is small plane inside.

Our customer said they can measure this, but I doubt it that they can.

Do you have any solution for this?

Thank you for help

Parents

UKCMM over 8 years ago

Agreed this should be profile, recently we had a similar callout and with customer agreement we rotated to the basic angle and took points and dimensioned as single axis TP, then had to callout the angularity between the faces.

I also doubt they report as per the drawing callout.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Reply

UKCMM over 8 years ago

Agreed this should be profile, recently we had a similar callout and with customer agreement we rotated to the basic angle and took points and dimensioned as single axis TP, then had to callout the angularity between the faces.

I also doubt they report as per the drawing callout.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Cancel

Children

No Data