The tolerance should be set to at least half of the probe tip diameter. on a 2mm tip I usually go for 1.25mm
Half the tip diameter PLUS however much positive deviation you ever expect to see on that surface in the worst case. If you just do half the tip the part would need to be perfect or stock off every time.
The tolerance should be set to at least half of the probe tip diameter. on a 2mm tip I usually go for 1.25mm
Half the tip diameter PLUS however much positive deviation you ever expect to see on that surface in the worst case. If you just do half the tip the part would need to be perfect or stock off every time.
