Once in awhile, pc-dmis will not print out one of the axis results when using Xact measure. For example, reporting out a true position of a feature that measures in the X and Z axis. After running program, only the Z axis results show up. If I hit F9 and then OK, the X axis results will appear but next time I run the program, same thing. Only the Z axis results appear. I have maybe 5 or 6 programs where this seems to happen a lot. I have tried everything I can think of to fix this but it just doesn't work. Has anyone else run into this problem or have any suggestions?
Prior to the 2020R2 release, there was a FCF output in one of our programs that was a Position at the end of the program. For some reason, the details would not print after each run. I was able to overcome this issue by inserting a legacy report command set to 'none'. For whatever reason, we never were missing the detail information after that program update. Not sure if this will help with your issue but just a thought.
We also tried deleting/remaking the output to no avail.
This occurred in 2015.1 fwiw.
Prior to the 2020R2 release, there was a FCF output in one of our programs that was a Position at the end of the program. For some reason, the details would not print after each run. I was able to overcome this issue by inserting a legacy report command set to 'none'. For whatever reason, we never were missing the detail information after that program update. Not sure if this will help with your issue but just a thought.
We also tried deleting/remaking the output to no avail.
This occurred in 2015.1 fwiw.
