I am struggling with this particular feature and i am not entirely sure why. I had it scanned 3 times by linear open scans then combined them in a constructed feature set. I dimensioned that as a profile of a surface, but it was not working properly as it was not reflecting the changes made on the cnc machine. I am trying to find the best scan for the notch portion, but i was wanting some input on what the best option would be. the notch diameter is 1mm, so it is fairly small, which may contributing to my struggle.
here is a side view of the part the angled flats are combined to make a midplane that rotates about Z plus to y plus.
The top flat is the a datum and is leveled along z
X and Z origin are set off of Cdat and Adat respectively. X origin is set off of the Bdat (cone feature)
here is a side view of the part the angled flats are combined to make a midplane that rotates about Z plus to y plus.
The top flat is the a datum and is leveled along z
X and Z origin are set off of Cdat and Adat respectively. X origin is set off of the Bdat (cone feature)
here is a side view of the part the angled flats are combined to make a midplane that rotates about Z plus to y plus.
