I am struggling with this particular feature and i am not entirely sure why. I had it scanned 3 times by linear open scans then combined them in a constructed feature set. I dimensioned that as a profile of a surface, but it was not working properly as it was not reflecting the changes made on the cnc machine. I am trying to find the best scan for the notch portion, but i was wanting some input on what the best option would be. the notch diameter is 1mm, so it is fairly small, which may contributing to my struggle.
here is my alignment, the B datum is the cone. the angled planes and notches are cut in with a form tool from the sides and a form tool puts the cone together. i think location is the bigger variable here
here is my alignment, the B datum is the cone. the angled planes and notches are cut in with a form tool from the sides and a form tool puts the cone together. i think location is the bigger variable here
