hexagon logo
Register Sign in
  • Replies 27 replies
  • Subscribers 223 subscribers
  • Views 395 views
  • Users 0 members are here
Options
Related

Alignment of Gear part

atul01011992
Daer all,

I am new guy for this user forum, currently I am using PC-DMIS in Camio 8.3. (Nikon Make)
Recently, I found a problem with a alignment issue for my product. It is about a alignment of [A-B I C I D-E ] of part. Please refer to attached file for details. In that A & B are the circles through which we are going to construct a 3S line as a primary datum, then moving ahead C is plane as a secondary datum and lastly D & E are tooth width, from which we need to construct a line through theirs mid points. As in that I don't understand how to do alignment of this part ?
Because there are 2 lines and 1 plane. and mostly unluckily axis of 3D line and Plane is same. Its conflicts my alignment. CAMIO is not allowing to add 2 line 1 plane alignment anyway.

Any help would be greatly appreciated.


Thank you in advance. Slight smile

Best Regards,​​​​​​​
Atul N
Attached Files
Parents
  • The axis constrains 4 dof.
    plane constrains 1
    line constrains 1

    4-1-1 alignment.

    Alignment must use features in order of constrainments. (Is that a word?)
    AXIS - 4
    then Plane - 1 or Line - 1
    then remaining feature.

    PCDMIS seems to permit either Axis-Line-Plane or Axis-Plane-Line and gives identical results.
Reply
  • The axis constrains 4 dof.
    plane constrains 1
    line constrains 1

    4-1-1 alignment.

    Alignment must use features in order of constrainments. (Is that a word?)
    AXIS - 4
    then Plane - 1 or Line - 1
    then remaining feature.

    PCDMIS seems to permit either Axis-Line-Plane or Axis-Plane-Line and gives identical results.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement