Adaptive Scan Lines 2018R1

I have seen this happening a lot in my Programs. It seems to be happening just with the Scanned lines, when done in mm. writing the programs, all fine and dandy, after running the program. It Projects my lines away from the part, giving me false readings. Will share my Code to show you the after results. Depth on all features are 1.5 mm on my auto feature settings. If you notice the X value goes wacky toe-backy. X being my primary plane. where my scanned circle holds the value. Depth is set the same.

CIR11      =FEAT/CONTACT/CIRCLE/ADAPTIVE_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
            THEO/<[COLOR=#EE82EE]40.5[/COLOR],0,0>,<1,0,0>,51
[COLOR=#FF0000]           ACTL/<40.5,-0.005,-0.032>,<1,0,0>,51.016[/COLOR]
            TARG/<40.5,0,0>,<1,0,0>
            START ANG=270,END ANG=450
            ANGLE VEC=<0,0,-1>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
LIN9       =FEAT/CONTACT/LINE/ADAPTIVE_LINEAR_SCAN,CARTESIAN,UNBOUNDED
            THEO/<[COLOR=#EE82EE]40.5[/COLOR],25.5,1.125>,<0,0,1>,<0,-1,0>,<-1,0,0>,44.95
[COLOR=#FF0000]           ACTL/<78.101,25.753,2.795>,<0,-0.0003722,0.9999999>,<0.0068002,-0.9999768,-0.0003722>,<-0.9999769,-0.0068002,-0.0000025>,41.5[/COLOR]
            TARG/<40.5,25.5,1.125>,<0,0,1>,<0,-1,0>,<-1,0,0>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
LIN10      =FEAT/CONTACT/LINE/ADAPTIVE_LINEAR_SCAN,CARTESIAN,UNBOUNDED
            THEO/<[COLOR=#EE82EE]40.5[/COLOR],-25.5,1.125>,<0,0,1>,<0,1,0>,<1,0,0>,44.95
[COLOR=#FF0000]           ACTL/<78.448,-25.264,2.798>,<0,-0.0002361,1>,<-0.0068005,0.9999768,0.0002361>,<0.9999769,0.0068005,0.0000016>,41.502[/COLOR]
            TARG/<40.5,-25.5,1.125>,<0,0,1>,<0,1,0>,<1,0,0>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO

Maybe look into this Don Ruggieri ?

Parents

KIRBSTER269 over 5 years ago

CYL4       =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
            THEO/<-0.02,-0.219,-0.115>,<1,0,0>,0.068,0.06
[COLOR=#FF0000]            ACTL/<-0.02,-0.2204,-0.1154>,<0.999946,0.0054583,-0.0088377>,0.0692,0.06[/COLOR]
            TARG/<-0.02,-0.219,-0.115>,<1,0,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<0,0,-1>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
CON3       =FEAT/CONTACT/CONE/ADAPTIVE_CONE_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN
            THEO/<0,-0.219,-0.115>,<1,0,0.0000005>,14,-0.02,0.073
[COLOR=#FF0000]            ACTL/<-12.0984,-0.756,0.0382>,<0.9989376,0.0443023,-0.012691>,9.2168,-0.022,0.0719[/COLOR]
            TARG/<0,-0.219,-0.115>,<1,0,0.0000005>
            START ANG=0,END ANG=360
            ANGLE VEC=<0.0000005,0,-1>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
CYL5       =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
            THEO/<-0.02,-0.114,-0.218>,<1,0,0>,0.068,0.06
[COLOR=#FF0000]            ACTL/<-0.02,-0.1143,-0.2186>,<0.9999705,-0.0075153,0.0015584>,0.0692,0.06[/COLOR]
            TARG/<-0.02,-0.114,-0.218>,<1,0,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<0,0,-1>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
CON4       =FEAT/CONTACT/CONE/ADAPTIVE_CONE_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN
            THEO/<0,-0.114,-0.218>,<1,0.0000002,0>,14,-0.02,0.073
[COLOR=#FF0000]            ACTL/<-10.9429,0.0516,-0.3909>,<0.9997605,-0.0151805,0.0157612>,9.0095,-0.0206,0.0717[/COLOR]
            TARG/<0,-0.114,-0.218>,<1,0.0000002,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO

Well more wonderful crap from these Adaptive scans this time Cones. This is getting old, especially, when the solution is use touch instead of scan. cylinders are good but the cones are not

Reply

KIRBSTER269 over 5 years ago

CYL4       =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
            THEO/<-0.02,-0.219,-0.115>,<1,0,0>,0.068,0.06
[COLOR=#FF0000]            ACTL/<-0.02,-0.2204,-0.1154>,<0.999946,0.0054583,-0.0088377>,0.0692,0.06[/COLOR]
            TARG/<-0.02,-0.219,-0.115>,<1,0,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<0,0,-1>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
CON3       =FEAT/CONTACT/CONE/ADAPTIVE_CONE_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN
            THEO/<0,-0.219,-0.115>,<1,0,0.0000005>,14,-0.02,0.073
[COLOR=#FF0000]            ACTL/<-12.0984,-0.756,0.0382>,<0.9989376,0.0443023,-0.012691>,9.2168,-0.022,0.0719[/COLOR]
            TARG/<0,-0.219,-0.115>,<1,0,0.0000005>
            START ANG=0,END ANG=360
            ANGLE VEC=<0.0000005,0,-1>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
CYL5       =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
            THEO/<-0.02,-0.114,-0.218>,<1,0,0>,0.068,0.06
[COLOR=#FF0000]            ACTL/<-0.02,-0.1143,-0.2186>,<0.9999705,-0.0075153,0.0015584>,0.0692,0.06[/COLOR]
            TARG/<-0.02,-0.114,-0.218>,<1,0,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<0,0,-1>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
CON4       =FEAT/CONTACT/CONE/ADAPTIVE_CONE_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN
            THEO/<0,-0.114,-0.218>,<1,0.0000002,0>,14,-0.02,0.073
[COLOR=#FF0000]            ACTL/<-10.9429,0.0516,-0.3909>,<0.9997605,-0.0151805,0.0157612>,9.0095,-0.0206,0.0717[/COLOR]
            TARG/<0,-0.114,-0.218>,<1,0.0000002,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<0,0,-1>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO

Well more wonderful crap from these Adaptive scans this time Cones. This is getting old, especially, when the solution is use touch instead of scan. cylinders are good but the cones are not

Children

No Data