Need help!! Not sure why PC-DMIS keeps giving me bad results. I have created different alignments, different hits, different workplanes and views but PC-DMIS still gives me wrong numbers. Any suggestions on what is going on?
On the blueprint I have provided the Dimensions I need and the results I am getting.
I am currently running on PC DMIS 2021.1
CMM SF 7.10.7
Good lord. Positional control and then everything things else is liner. So over dimensioned..... That doesn't fix your issue though... 1 thing that makes code so much easier to read. Re-name your features to the DATUMS on the print. Switch you program around. Yeah it will be longer..... Check A. Level and Set Z. Then check B and C. NEW alignment. Level to A, Rotate to B-C, Set Z on A, Set X and Y on B. Now check angled cylinder. Then create intersection from CYL to A. And use postion. Why are you suing distance and location anyways ?
Good lord. Positional control and then everything things else is liner. So over dimensioned..... That doesn't fix your issue though... 1 thing that makes code so much easier to read. Re-name your features to the DATUMS on the print. Switch you program around. Yeah it will be longer..... Check A. Level and Set Z. Then check B and C. NEW alignment. Level to A, Rotate to B-C, Set Z on A, Set X and Y on B. Now check angled cylinder. Then create intersection from CYL to A. And use postion. Why are you suing distance and location anyways ?
