I'm not hitting a surface/simulator that the part is sitting on, I am hitting the part.
Plane facing straight up in the air, hits straight down on Z.
Honestly, I'm not doing it, my guy 30miles away is and I remoted in.
The program worked yesterday.
Today, it refuses to keep the vector.
Did a restart of the PC.
Did a restart of the PC and the controller.
2021.2 sp4
STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES ALIGNMENT/END MODE/MANUAL PREHIT/0.0197 RETRACT/0.0197 FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , LOADPROBE/2021X2X72 TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0 PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE THEO/<-0.1212,-0.0611,0>,<0,0,1> ACTL/<-0.1212,-0.0611,0>,<0,0,1> MEAS/PLANE,4 HIT/BASIC,NORMAL,<-2.4829,-0.242,0>,<0,0,1>,<-2.4829,-0.242,0>,USE THEO=YES HIT/BASIC,NORMAL,<-0.4623,-2.4556,0>,<0,0,1>,<-0.4623,-2.4556,0>,USE THEO=YES HIT/BASIC,NORMAL,<2.6497,-0.0812,0>,<0,0,1>,<2.6497,-0.0812,0>,USE THEO=YES HIT/BASIC,NORMAL,<-0.1893,2.5343,0>,<0,0,1>,<-0.1893,2.5343,0>,USE THEO=YES ENDMEAS/
Vector of plane prior to taking the hits manually above.
Vecor of plane after taking the hits manually below.
STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES ALIGNMENT/END MODE/MANUAL PREHIT/0.0197 RETRACT/0.0197 FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , LOADPROBE/2021X2X72 TIP/T1A0B0, SHANKIJK=0, 0, 1, ANGLE=0 PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE THEO/<-0.1212,-0.0611,0>,<0,0,1> ACTL/<15.4765,24.4678,-27.5789>,<0.0000363,-0.0002564,-1> MEAS/PLANE,4 HIT/BASIC,NORMAL,<-2.4829,-0.242,0>,<0,0,1>,<15.6659,21.776,-27.5783>,USE THEO=YES HIT/BASIC,NORMAL,<-0.4623,-2.4556,0>,<0,0,1>,<17.9232,25.2091,-27.579>,USE THEO=YES HIT/BASIC,NORMAL,<2.6497,-0.0812,0>,<0,0,1>,<15.348,26.9283,-27.5796>,USE THEO=YES HIT/BASIC,NORMAL,<-0.1893,2.5343,0>,<0,0,1>,<12.9688,23.9577,-27.5788>,USE THEO=YES ENDMEAS/
