hexagon logo
Register Sign in
  • Replies 6 replies
  • Subscribers 221 subscribers
  • Views 62 views
  • Users 0 members are here
Options
Related

analysis view freezing program

p_farlow_79
when i write a measurement routine with a scan and accompanying analysis view on my offline seat it works fine, i run it offline several times to make sure the program is good, no collisions, etc.. But when i transfer it to the online CMM computer via a server and the program gets to the "analysisview" command the program freezes. I have to go in and delete it directly on the CMM and then just generate a new one. Now this isn't catastrophic failure or anything but the CMMs are usually tied up by inspectors and machinists doing in process checks. Has anyone had an issue like this? I program with PCDmis 2022r1 but the CMMs run 2018r1. i also have 2018r2 on my offline but that still causes the same issue.
Parents
  • Running scans, is exhausting work on your computer, especially on a bridge CMM. It's like lifting weights, the more plates you add to the bar, the harder it is to lift, Your Offline seat has one job running the program virtually, While the one tied to your machine has 2, running the program, virtually and reality. The more scans you add the slower it will go, the bigger the scans, the slower it will go, In your Offline seat the computer doesn't have to calculate anything because the part is perfect nothing changes "0's" across the board, on the live CMM it has to Calculate all these points and come up with the solution. Which equation would be faster and easier to do?

    OFFLINE

    0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0=?

    ONLINE

    -.001+.002+.001+-.001+-.001+.001+-.001+-.002+-.003+.001+.000+.001+.002+.004+.-.001+.-.002=?

    Well you get the jist of it
Reply
  • Running scans, is exhausting work on your computer, especially on a bridge CMM. It's like lifting weights, the more plates you add to the bar, the harder it is to lift, Your Offline seat has one job running the program virtually, While the one tied to your machine has 2, running the program, virtually and reality. The more scans you add the slower it will go, the bigger the scans, the slower it will go, In your Offline seat the computer doesn't have to calculate anything because the part is perfect nothing changes "0's" across the board, on the live CMM it has to Calculate all these points and come up with the solution. Which equation would be faster and easier to do?

    OFFLINE

    0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0+0=?

    ONLINE

    -.001+.002+.001+-.001+-.001+.001+-.001+-.002+-.003+.001+.000+.001+.002+.004+.-.001+.-.002=?

    Well you get the jist of it
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement