Masking datum position in xact measure V2016

REF_PISTON_DRF =POSITION : PISTON_CYL
            FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=NO,SHOWEXPANDED=NO
              SIZE TOLERANCES/1,DIAMETER,14.042,0.01,0.01
              PRIMARY DIMENSION/POSITION,DIAMETER,0.25,MMC,,,A,B,MMC,C,
              NOTE/REF_PISTON_DRF
            FEATURES/PISTON_CYL,,
            DIMINFO/REF_PISTON_DRF;ICON,DIMID,FEATID,VERT,HORIZ, ,$
                    HEADINGS,GRAPH AXIS;MEAS, , , , , , , ,
DATUM_AD_AL=ALIGNMENT/START,RECALL[emoticon:6D505171FAA4497C85C5CA27290C555D]ATUM_TUV_AL1,LIST=YES
              ALIGNMENT/LEVEL,YMINUS,DATUM_A_PLN2
              ALIGNMENT/ROTATE,ZPLUS,TO,PISTON_CYL,ABOUT,YMINUS
              ALIGNMENT/TRANS,XAXIS,PISTON_CYL
              ALIGNMENT/TRANS,YAXIS,DATUM_A_PLN2
            ALIGNMENT/END
D11_12_TOP =POSITION : RACK_TOP_CIR
            FEATCTRLFRAME/SHOWNOMS=YES,SHOWPARAMS=YES,SHOWEXPANDED=YES
            CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=5.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
            COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Current Alignment
            CUSTOMIZED DRF=NO
            STANDARDTYPE=ASME_Y14_5
              SIZE TOLERANCES/1,DIAMETER,5.64,0.03,0.03
              PRIMARY DIMENSION/POSITION,DIAMETER,0.35,MMC,A,D,MMC,<size>,<dat>
              SECONDARY DIMENSION/<Dim>,<tol>,MMC,<dat>,<dat>,<dat>
              NOTE/D11_12_TOP
            FEATURES/RACK_TOP_CIR,,
            RACK_TOP_CIR
             X:NOM=13.3
             Y:NOM=11.37
            <NEW>
            DIMINFO/D11_12_TOP;ICON,DIMID,FEATID,VERT,HORIZ, ,$
                    HEADINGS,GRAPH AXIS;MEAS, , , , , , , ,
D11_12_BOTT =POSITION : RACK_BOTT_CIR
            FEATCTRLFRAME/SHOWNOMS=YES,SHOWPARAMS=YES,SHOWEXPANDED=YES
            CADGRAPH=POSITION,REPORTGRAPH=OFF,TEXT=OFF,MULT=100.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
            COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Current Alignment
            CUSTOMIZED DRF=NO
            STANDARDTYPE=ASME_Y14_5
              SIZE TOLERANCES/1,DIAMETER,5.64,0.03,0.03
              PRIMARY DIMENSION/POSITION,DIAMETER,0.35,MMC,A,D,MMC,<size>,<dat>
              SECONDARY DIMENSION/<Dim>,<tol>,MMC,A,D,MMC,<size>,<dat>
              NOTE/D11_12_BOTT
            FEATURES/RACK_BOTT_CIR,,
            RACK_BOTT_CIR
             X:NOM=13.3
             Y:NOM=11.37
            <NEW>​