MODE/DCC V1 =LOOP/START,ID=YES,NUMBER=2,START=1,SKIP=, OFFSET:XAXIS=0,YAXIS=-11.5,ZAXIS=0,ANGLE=0 MOVESPEED/ 250 TOUCHSPEED/ 3 FLY/ON MOVE/POINT,NORMAL,<-0.0075,2.3808,7.921> MOVE/POINT,NORMAL,<4.134,2.3808,2.5197> PLN2 =FEAT/PLANE,CARTESIAN,TRIANGLE THEO/<5.7484,1.842,0>,<0,0,1> ACTL/<5.7485,1.8418,-0.0045>,<0.0002279,-0.0007598,0.9999997> MEAS/PLANE,3 HIT/BASIC,NORMAL,<3.9052,1.3284,0>,<0,0,1>,<3.9051,1.3 281,-0.0045>,USE THEO=YES (CODE REMOVED TO SAFE SPACE FOR FORUM) ENDMEAS/ MOVE/POINT,NORMAL,<7.3177,-0.4021,1.109> MOVE/POINT,NORMAL,<7.3177,-0.4457,-0.5434> LIN2 =FEAT/LINE,CARTESIAN,UNBOUNDED THEO/<0.1081,0,-0.6337>,<1,0,0> ACTL/<0.1079,0.0084,-0.6336>,<1,0.000076,0> MEAS/LINE,2,ZPLUS HIT/BASIC,NORMAL,<0.1081,0,-0.6384>,<0,-1,0>,<0.1079,0.0084,-0.6385>,USE THEO=YES (CODE REMOVED TO SAFE SPACE FOR FORUM) ENDMEAS/ MOVE/POINT,NORMAL,<8.8349,-0.1429,3.0301> MOVE/POINT,NORMAL,<8.8349,2.464,3.1052> MOVE/POINT,NORMAL,<-1.0149,2.464,2.9871> MOVE/POINT,NORMAL,<-0.821,2.464,-0.395> PNT2 =FEAT/POINT,CARTESIAN THEO/<0,2.0871,-0.3681>,<-1,0,0> ACTL/<0.0111,2.0867,-0.368>,<-1,0,0> MEAS/POINT,1,WORKPLANE HIT/BASIC,NORMAL,<0,2.0871,-0.3681>,<-1,0,0>,<0.0111,2.0867,-0.368>,USE THEO=YES ENDMEAS/ A2 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES ALIGNMENT/LEVEL,ZPLUS,PLN2 ALIGNMENT/TRANS,ZAXIS,PLN2 ALIGNMENT/ROTATE,XPLUS,TO,LIN2,ABOUT,ZPLUS ALIGNMENT/TRANS,YAXIS,LIN2 ALIGNMENT/TRANS,XAXIS,PNT2 ALIGNMENT/END TOUCHSPEED/ 1 PREHIT/0.05 RETRACT/0.05 MOVE/POINT,NORMAL,<-0.9451,2.0871,2.4574> (CODE REMOVED TO SAFE SPACE FOR FORUM) PLN3-DATUM B =FEAT/PLANE,CARTESIAN,TRIANGLE THEO/<4.7898,11.5,-0.7307>,<0,-1,0> ACTL/<4.7909,11.5004,-0.7393>,<0.0000402,-0.999999,-0.0014355> MEAS/PLANE,8 HIT/BASIC,NORMAL,<0.1503,11.5,-0.6915>,<0,-1,0>,<0.1515,11.5001,-0.7002>,USE THEO=YES (PART OF CODE TAKEN OUT TO SAFE SPACE FOR THE FORUM, WAS JUST MEASURING A PLANE) ENDMEAS/ MOVE/POINT,NORMAL,<8.0074,-0.1971,2.386> MOVE/POINT,NORMAL,<8.0074,2.5067,2.3753> PLN4-DATUM A =FEAT/PLANE,CARTESIAN,TRIANGLE THEO/<5.7571,13.8907,0>,<0,0,1> ACTL/<5.758,13.8904,-0.0083>,<0.0000803,-0.0002732,1> MEAS/PLANE,12 (PART OF CODE TAKEN OUT TO SAFE SPACE FOR THE FORUM, WAS JUST MEASURING A PLANE) ENDMEAS/ MOVE/POINT,NORMAL,<7.3516,1.0049,3.4112> (CODE REMOVED TO SAFE SPACE FOR FORUM) PLN5-BACKSIDE FOR COMPARISON =FEAT/PLANE,CARTESIAN,TRIANGLE THEO/<6.2292,16.09,-0.7728>,<0,1,0> ACTL/<6.2299,16.095,-0.7814>,<-0.0000332,0.9999996,-0.0008982> MEAS/PLANE,9 HIT/BASIC,NORMAL,<11.4342,16.09,-0.6407>,<0,1,0>,<11.4354,16.0952,-0.6494>,USE THEO=YES (PART OF CODE TAKEN OUT TO SAFE SPACE FOR THE FORUM, WAS JUST MEASURING A PLANE) ENDMEAS/ MOVE/POINT,NORMAL,<-0.962,5.6591,2.1858> MOVE/POINT,NORMAL,<-0.5673,5.6591,-0.5041> PLN3-DATUM C =FEAT/PLANE,CARTESIAN,TRIANGLE THEO/<0,14.0367,-0.4754>,<-1,0,0> ACTL/<0.0007,14.0363,-0.4842>,<-0.9999982,0.0000008,0.001918> MEAS/PLANE,17 HIT/BASIC,NORMAL,<0,16.0305,-0.7623>,<-1,0,0>,<-0.0001,16.0302,-0.7713>,USE THEO=YES (PART OF CODE TAKEN OUT TO SAFE SPACE FOR THE FORUM, WAS JUST MEASURING A PLANE) ENDMEAS/ MOVE/POINT,NORMAL,<-1.094,0.0399,2.1094> MOVE/POINT,NORMAL,<2.0704,0.0399,3.2446> A3 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES ALIGNMENT/LEVEL,ZPLUS,PLN4-DATUM A ALIGNMENT/TRANS,ZAXIS,PLN4-DATUM A ALIGNMENT/ROTATE,YMINUS,TO,PLN3-DATUM B,ABOUT,ZPLUS ALIGNMENT/TRANS,YAXIS,PLN3-DATUM B ALIGNMENT/TRANS,XAXIS,PLN3-DATUM C ALIGNMENT/END CIR1-LEFT BORE OD =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR THEO/<2.27,13.795,0.4>,<0,0,1>,2.94,0 ACTL/<2.2748,13.7989,0.3881>,<0,0,1>,2.9428,0 TARG/<2.27,13.795,0.4>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=10,DEPTH=-0.05,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=BOTH,DISTANCE=1 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO CIR2-RIGHT BORE OD =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR THEO/<9.235,13.795,0.4>,<0,0,1>,2.94,0 ACTL/<9.2371,13.7989,0.3881>,<0,0,1>,2.9423,0 TARG/<9.235,13.795,0.4>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=10,DEPTH=-0.05,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=BOTH,DISTANCE=1 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO (CODE REMOVED TO SAFE SPACE FOR FORUM)-CODE FOR MEASURING A BORE CIR17-BOTTOM RIGHT CLEARANCE HOLE =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<6.276,12.355,-0.315>,<0,0,1>,0.56 ACTL/<6.2787,12.3591,-0.3269>,<0,0,1>,0.566 TARG/<6.276,12.355,-0.315>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=10,DEPTH=0.065,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=BOTH,DISTANCE=1 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO (CODE REMOVED TO SAFE SPACE FOR FORUM)-WAS CODE FOR NON-IMPORTANT CIRCLES NOT AFFECTED CIR20-NEXT ADJACENT CLEARANCE HOLE =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<5.156,14.295,0>,<0,0,1>,0.56 ACTL/<5.1596,14.2993,-0.0119>,<0,0,1>,0.5678 TARG/<5.156,14.295,0>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=10,DEPTH=0.065,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=BOTH,DISTANCE=1 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO CIR21-TOP LEFT CLEARANCE HOLE =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<5.276,15.235,-0.315>,<0,0,1>,0.56 ACTL/<5.28,15.239,-0.3269>,<0,0,1>,0.566 TARG/<5.276,15.235,-0.315>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=10,DEPTH=0.065,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=BOTH,DISTANCE=1 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO CIR22-TOP RIGHT CLEARANCE HOLE =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<6.276,15.235,-0.2563>,<0,0,1>,0.56 ACTL/<6.2796,15.2389,-0.2681>,<0,0,1>,0.5663 TARG/<6.276,15.235,-0.2563>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=YES NUMHITS=10,DEPTH=0.065,PITCH=0 SAMPLE METHOD=SAMPLE_HITS SAMPLE HITS=0,SPACER=0 AVOIDANCE MOVE=BOTH,DISTANCE=1 FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO SHOW HITS=NO MOVE/POINT,NORMAL,<5.5233,2.3556,4.4173> MOVE/INCREMENT,<0.0007,-0.0011,6> MOVE/INCREMENT,<9,0.0005,-0.0011> MOVE/POINT,NORMAL,<17.1669,-20.2313,10.1206> LOADPROBE/ 1MM X 40MM TIP/T1A0B0, SHANKIJK=0.0001, -0.0002, 1, ANGLE=0.003 CALIBRATE ACTIVE TIP WITH FEAT_ID= SPH1-CALIBRATION TOOL =FEAT/SPHERE,CARTESIAN,OUT THEO/<2.6061,-8.3221,4.4226>,<0,0,1>,0.9813 ACTL/<2.5995,-8.3296,4.4315>,<-0.0000314,0.0007901,0.9999997>,0.9841 MEAS/SPHERE,13 HIT/BASIC,NORMAL,<2.6428,-8.3562,4.9107>,<0.0749079,-0.0696,0.9947586>,<2.6318,-8.3602,4.9217>,USE THEO=YES MOVE/CIRCULAR HIT/BASIC,NORMAL,<2.8644,-8.5553,4.769>,<0.5260029,-0.4749804,0.7054889>,<2.8555,-8.5614,4.7817>,USE THEO=YES MOVE/CIRCULAR HIT/BASIC,NORMAL,<2.9066,-8.0994,4.7401>,<0.6124523,0.453895,0.6472105>,<2.8 97,-8.1022,4.7508>,USE THEO=YES MOVE/CIRCULAR (CODE REMOVED TO SAFE SPACE FOR FORUM---WAS REST OF SPHERE-CAL CODING) ENDMEAS/