hexagon logo
Register Sign in
  • Replies 18 replies
  • Subscribers 223 subscribers
  • Views 178 views
  • Users 0 members are here
Options
Related

Loopity Loops (and how to offset em')

pcdmisstudent
Greetings fellow metrologists

I would like some help on my loop problem.
I have to create a loop to measure many parts simultaneously. I have done this before, but it was cylindrical parts, so it was quite easy to create the offsets in the loops.
But now i have this not-so-round part and its coordinatesystem doesnt match cmm axis
so im not quite sure how to go about this problem.
(see picture for part coordinates and how i will place them on the cmm). they will be placed in mulitple rows.

ty guys, u always help me
Attached Files
Parents
  • Maybe:

    Measure the thread distances, align on them (cir-cir) and the base plate plane, set zero in one of them.
    Move to DCC, measure your part, align accordingly (so it matches the part CAD).
    Evaluate.
    Recall the first alignment.
    Offset the alignment to the next set of thread distances.
    Jump up to the DCC section of the actual part measurement.
    Evaluate.
    Recall the first alignment.
    Offset... bla, bla

    Rinse, repeat.
  • in reply to vpt.se
    Align it and measure the part features for the part alignment "manually" in DCC, either by manual/learned features or by "learning" autofeatures (open autofeature dialog and manually take points to fill the XYZ, IJK in the dialog).

    Or, measure the part features for the part alignment manually (don't bother about the thread bosses), go to DCC and create the measurements/evaluations for the part. Offset the alignment with the distance between the thread bosses in X, still in DCC and it should measure the next part.
Reply
  • in reply to vpt.se
    Align it and measure the part features for the part alignment "manually" in DCC, either by manual/learned features or by "learning" autofeatures (open autofeature dialog and manually take points to fill the XYZ, IJK in the dialog).

    Or, measure the part features for the part alignment manually (don't bother about the thread bosses), go to DCC and create the measurements/evaluations for the part. Offset the alignment with the distance between the thread bosses in X, still in DCC and it should measure the next part.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement