Is it possible to construct a point here?

Is it possible to construct this point? I am having trouble creating a line at the top of the circle to intersect with.

Parents

UKCMM 's solution with assignments (assuming that the top plane is Z+, LIN18 X+ from left to right, ALN is the current alignment) :

ASSIGN/V1=CIRC4.XYZ-CIRC7.XYZ
ASSIGN/V2=CROSS(V1,ALN.ZAXIS)
ASSIGN/V3=CIRC4.XYZ+CIRC4.R*UNIT(V1)
F1 = GENERIC/LINE,DEPENDENT,CARTESIAN,$
NOM/XYZ,<V3.X,V3.Y,V3.Z>,$
MEAS/XYZ,<V3.X,V3.Y,V3.Z)>,$
NOM/IJK,<V2.I,V2.J,V2.K)>,$
MEAS/IJK,<FORMAT("%3.8f",V2.I),FORMAT("%3.8f",V2.J),FOR MAT("%3.8f",V2.K))>,$
LENGTH/10,10,$
ASSIGN/V4=CROSS(ALN.ZAXIS,LIN18.IJK)...............here, V4 could be replaced by ALN.YAXIS or MPOINT(0,1,0)
ASSIGN/V5=CIR4.XYZ+CIR4.R*V4
F2 = GENERIC/LINE,DEPENDENT,CARTESIAN,$
NOM/XYZ,<V5.X,V5.Y,V5.Z>,$
MEAS/XYZ,<V5.X,V5.Y,V5.Z)>,$
NOM/IJK,<1,0,0>,$
MEAS/IJK,<1,0,0>,$
LENGTH/10,10,$

Then intersect F1 and F2

Reply

JEFMAN over 1 year ago

UKCMM 's solution with assignments (assuming that the top plane is Z+, LIN18 X+ from left to right, ALN is the current alignment) :

ASSIGN/V1=CIRC4.XYZ-CIRC7.XYZ
ASSIGN/V2=CROSS(V1,ALN.ZAXIS)
ASSIGN/V3=CIRC4.XYZ+CIRC4.R*UNIT(V1)
F1 = GENERIC/LINE,DEPENDENT,CARTESIAN,$
NOM/XYZ,<V3.X,V3.Y,V3.Z>,$
MEAS/XYZ,<V3.X,V3.Y,V3.Z)>,$
NOM/IJK,<V2.I,V2.J,V2.K)>,$
MEAS/IJK,<FORMAT("%3.8f",V2.I),FORMAT("%3.8f",V2.J),FOR MAT("%3.8f",V2.K))>,$
LENGTH/10,10,$
ASSIGN/V4=CROSS(ALN.ZAXIS,LIN18.IJK)...............here, V4 could be replaced by ALN.YAXIS or MPOINT(0,1,0)
ASSIGN/V5=CIR4.XYZ+CIR4.R*V4
F2 = GENERIC/LINE,DEPENDENT,CARTESIAN,$
NOM/XYZ,<V5.X,V5.Y,V5.Z>,$
MEAS/XYZ,<V5.X,V5.Y,V5.Z)>,$
NOM/IJK,<1,0,0>,$
MEAS/IJK,<1,0,0>,$
LENGTH/10,10,$

Then intersect F1 and F2

Children

No Data