Your Products have been synced, click here to refresh
Don't forget that because there are no datums, both profile callouts must be evaluated simultaneously. You will need to use either XactMeasure or the Geometric Tolerance command to do this, depending on what version of PC-DMIS you have - legacy cannot perform simultaneous evaluations. Also, because you don't have a CAD model, you will need to make sure the nominals are correct and will not be able to use iterate and re-pierce.
Don't forget that because there are no datums, both profile callouts must be evaluated simultaneously. You will need to use either XactMeasure or the Geometric Tolerance command to do this, depending on what version of PC-DMIS you have - legacy cannot perform simultaneous evaluations. Also, because you don't have a CAD model, you will need to make sure the nominals are correct and will not be able to use iterate and re-pierce.
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |