Today after manual alignment DCC is off by .05 in Y. Code below.
Are there any other settings that could be throwing things off?
Issues with auto features to watch for?
Tried shelling it and it didn't fix the problem.
COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, TAKE 3 HITS ON DATUM -A- (TOP OF PART) MAN_Z =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR THEO/<0.852,-0.1382,0.263>,<0,0,1> ACTL/<0.852,-0.1382,0.263>,<0,0,1> TARG/<0.852,-0.1382,0.263>,<0,0,1> ANGLE VEC=<1,0,0>,RADIAL SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, TAKE 4 HITS ON LEFT MOST Ø.110 THRU MAN_LEFT =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<0.151,-0.214,0.263>,<0,0,1>,0.11 ACTL/<0.151,-0.214,0.263>,<0,0,1>,0.11 TARG/<0.151,-0.214,0.263>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO COMMENT/OPER,NO,FULL SCREEN=NO,AUTO-CONTINUE=NO, TAKE 4 HITS ON RIGHT MOST Ø.110 THRU MAN_RIGHT =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR THEO/<2.503,-0.214,0.263>,<0,0,1>,0.11 ACTL/<2.503,-0.214,0.263>,<0,0,1>,0.11 TARG/<2.503,-0.214,0.263>,<0,0,1> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MAN_LIN1 =FEAT/LINE,CARTESIAN,UNBOUNDED,NO THEO/<0.151,-0.214,0.263>,<1,0,0> ACTL/<0.151,-0.214,0.263>,<1,0,0> CONSTR/LINE,BF,3D,MAN_LEFT,MAN_RIGHT,, OUTLIER_REMOVAL/OFF,3 FILTER/OFF,WAVELENGTH=0 MAN_ALIGN =ALIGNMENT/START,RECALL:STARTUP,LIST=YES ALIGNMENT/LEVEL,ZPLUS,MAN_Z ALIGNMENT/ROTATE,XPLUS,TO,MAN_LIN1,ABOUT,ZPLUS ALIGNMENT/TRANS,XAXIS,MAN_LEFT ALIGNMENT/TRANS,YAXIS,MAN_LEFT ALIGNMENT/TRANS,ZAXIS,MAN_Z ALIGNMENT/END MODE/DCC
Attached Files
![](/community/resized-image/__size/121x121/__key/communityserver-discussions-components-files/694/2023_2D00_03_2D00_20_5F00_11_2D00_06_2D00_38.png)