So I have always used a clearance cube when programing. I do understand it may slow the run time down a bit, but feel it is safer to use it then not. However The guy I replace did not ever use them in any program. He has move points everywhere. It got me to a thinkin what is the best way to use them or not to use them???
Also when I go to add the CC to his programs it seems to mess them up and they do not run correctly. Why would this be?
increment moves can be a bugaboo. If you get an 'air-trigger' during an incremental move, and you tell it to continue, it will do the ENTIRE incremental move from the current probe position. So, if the incremental move was 0,0,100, and it moved 0,0,75 and air-triggered, the continue button will make it move 0,0,100 from the air-trigger position.
increment moves can be a bugaboo. If you get an 'air-trigger' during an incremental move, and you tell it to continue, it will do the ENTIRE incremental move from the current probe position. So, if the incremental move was 0,0,100, and it moved 0,0,75 and air-triggered, the continue button will make it move 0,0,100 from the air-trigger position.