STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/MANUAL
FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
LOADPROBE/STAR
TIP/T1A0B180, SHANKIJK=1, 0, 0, ANGLE=180
MAN_CYL1 =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<0,0.7,0>,<0,-1,0>,1.9688,-0.822
ACTL/<0,0.7,0>,<0,-1,0>,1.9688,-0.822
TARG/<0,0.7,0>,<0,-1,0>
START ANG=90,END ANG=-90
ANGLE VEC=<1,0,0>
DIRECTION=CW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=3,NUMLEVELS=3,DEPTH=0,END OFFSET=0,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=0
AVOIDANCE MOVE=NO
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO
MAN_A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/LEVEL,YMINUS,MAN_CYL1
ALIGNMENT/TRANS,XAXIS,MAN_CYL1
ALIGNMENT/TRANS,ZAXIS,MAN_CYL1
ALIGNMENT/END
MAN_PLN1 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
THEO/<0,0,0>,<0,-1,0>
ACTL/<0,0,0>,<0,-1,0>
TARG/<0,0,0>,<0,-1,0>
ANGLE VEC=<1,0,0>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=3,NUMROWS=1
SPACER=0.9
AVOIDANCE MOVE=NO
SHOW HITS=NO
MAN_PLN2 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,TRIANGLE,LEAST_SQR
THEO/<0.75,9.0764,0.027>,<1,0,0>
ACTL/<0.75,9.0764,0.027>,<1,0,0>
TARG/<0.75,9.0764,0.027>,<1,0,0>
ANGLE VEC=<0,0,-1>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=3,NUMRINGS=1
SPACER=0.2
AVOIDANCE MOVE=NO
SHOW HITS=NO
MAN_A2 =ALIGNMENT/START,RECALL:MAN_A1,LIST=YES
ALIGNMENT/TRANS,YAXIS,MAN_PLN1
ALIGNMENT/ROTATE,XPLUS,TO,MAN_PLN2,ABOUT,YPLUS
ALIGNMENT/END
MODE/DCC
