Hi All -
Came across this FCF earlier today and was wondering how to enter this into the FCF within my Program??
It allows me to choose A or B, but not both under the secondary datum (Or Primary Datum as shown further down in the photo)... Any help would be greatly appreciated. Thanks!!
Define each datum feature as a datum using the DATDEF command. In your geometric tolerance dialog window, create a new datum reference, select the common datum checkbox, and choose the two previously defined datums.
If you're using XactMeasure, define the two datums (individually) using the DATDEF command. Type A-B in the datum reference frame.
Define each datum feature as a datum using the DATDEF command. In your geometric tolerance dialog window, create a new datum reference, select the common datum checkbox, and choose the two previously defined datums.
If you're using XactMeasure, define the two datums (individually) using the DATDEF command. Type A-B in the datum reference frame.