hexagon logo
Register Sign in
  • Replies 10 replies
  • Subscribers 222 subscribers
  • Views 503 views
  • Users 0 members are here
Options
Related

Calibrating Multiple Tips

MrCMM
I have calibrated multiple tip angles to work together with the calibration sphere in the same position for all the tips. There is one tip angle (A90B180) that is out .005" in the Y axis from all the other tips. I've tried recalibrating them several times but I still get the same results. Does anyone have a solution for this? Thanks!
Parents


  • If you select "User defined calibration order" and save it as a Parameter Set, you can probably avoid this. My Parameter sets start with greatest -B angle and rotate around to greatest +B angle.

    We have different sized cmms across 3 states so programs run on the 1st open CMM that has the volume for the part. using the user defined command is just not feasible since collision detection makes the necessary changes. kind of frustrating that this is a know issue and is not made public with a bulletin, makes you wonder what else is going on that we as users are not being made aware of.
Reply


  • If you select "User defined calibration order" and save it as a Parameter Set, you can probably avoid this. My Parameter sets start with greatest -B angle and rotate around to greatest +B angle.

    We have different sized cmms across 3 states so programs run on the 1st open CMM that has the volume for the part. using the user defined command is just not feasible since collision detection makes the necessary changes. kind of frustrating that this is a know issue and is not made public with a bulletin, makes you wonder what else is going on that we as users are not being made aware of.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement