hexagon logo
Register Sign in
  • Replies 9 replies
  • Subscribers 222 subscribers
  • Views 198 views
  • Users 0 members are here
Options
Related

Subroutine Circle Construction Errors

acgarcia
I created a main program to run 3 subroutines. I am constructing circles using 2 auto circles, then construct a scan, then update the scan to hits cir1.hit[1..cir1.numhits],cir2.hit[1..cir2.numhits] method. Finally constructing a circle out of the scan and dimension. The problem is the construction is failing when I run my main program. It works fine when I run the sub routine as a stand alone program but it gives me an construction error when I run this through main program as a subroutine. 

CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,-0.6>,<0,0,1>,2.42
ACTL/<0,0,-0.6>,<0,0,1>,2.42
TARG/<0,0,-0.6>,<0,0,1>
START ANG=22.6607,END ANG=67.3393
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=5,DEPTH=0,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=0
AVOIDANCE MOVE=NO,DISTANCE=0.2
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO

CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,-0.6>,<0,0,1>,2.42
ACTL/<0,0,-0.6>,<0,0,1>,2.42
TARG/<0,0,-0.6>,<0,0,1>
START ANG=202.6607,END ANG=247.3393
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=6,DEPTH=0,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=0
AVOIDANCE MOVE=NO,DISTANCE=0.2
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO

SCN1 =FEAT/SET,CARTESIAN
THEO/<-0.0763,-0.0763,-0.6>,<0,0,1>
ACTL/<-0.0763,-0.0763,-0.6>,<0,0,1>
CONSTR/SET,BASIC,CIR1.HIT[1..CIR1.NUMHITS],CIR2.HIT[1..CIR2.NUMHITS],,

2420_ID_CIR=FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<0,0,-0.6>,<0,0,1>,2.42
ACTL/<0,0,-0.6>,<0,0,1>,2.42
CONSTR/CIRCLE,BF,3D,SCN1,,
OUTLIER_REMOVAL/OFF,3​


Parents
  • I did a test where I used the "to points" method and then constructed a circle from all the points and it worked. I like using auto circles because I can then adjust the number of points and the spread is always even BUT I guess I just need to do whatever works. Unless someone has something that I can try?
Reply
  • I did a test where I used the "to points" method and then constructed a circle from all the points and it worked. I like using auto circles because I can then adjust the number of points and the spread is always even BUT I guess I just need to do whatever works. Unless someone has something that I can try?
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement