Subroutine Circle Construction Errors

I created a main program to run 3 subroutines. I am constructing circles using 2 auto circles, then construct a scan, then update the scan to hits cir1.hit[1..cir1.numhits],cir2.hit[1..cir2.numhits] method. Finally constructing a circle out of the scan and dimension. The problem is the construction is failing when I run my main program. It works fine when I run the sub routine as a stand alone program but it gives me an construction error when I run this through main program as a subroutine.

CIR1 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,-0.6>,<0,0,1>,2.42
ACTL/<0,0,-0.6>,<0,0,1>,2.42
TARG/<0,0,-0.6>,<0,0,1>
START ANG=22.6607,END ANG=67.3393
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=5,DEPTH=0,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=0
AVOIDANCE MOVE=NO,DISTANCE=0.2
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO

CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
THEO/<0,0,-0.6>,<0,0,1>,2.42
ACTL/<0,0,-0.6>,<0,0,1>,2.42
TARG/<0,0,-0.6>,<0,0,1>
START ANG=202.6607,END ANG=247.3393
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=YES
NUMHITS=6,DEPTH=0,PITCH=0
SAMPLE METHOD=SAMPLE_HITS
SAMPLE HITS=0,SPACER=0
AVOIDANCE MOVE=NO,DISTANCE=0.2
FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
SHOW HITS=NO

SCN1 =FEAT/SET,CARTESIAN
THEO/<-0.0763,-0.0763,-0.6>,<0,0,1>
ACTL/<-0.0763,-0.0763,-0.6>,<0,0,1>
CONSTR/SET,BASIC,CIR1.HIT[1..CIR1.NUMHITS],CIR2.HIT[1..CIR2.NUMHITS],,

2420_ID_CIR=FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
THEO/<0,0,-0.6>,<0,0,1>,2.42
ACTL/<0,0,-0.6>,<0,0,1>,2.42
CONSTR/CIRCLE,BF,3D,SCN1,,
OUTLIER_REMOVAL/OFF,3

Parents

Henniger123 10 months ago

Hello,

this works for me =

* 1
I made the construct circle from 2D and selected the correct working plane.
Maybe your working plane is wrong, i cant see it in your post.

C1         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<-154.214,0,-159.693>,<0,-1,0>,17.5
            ACTL/<-154.214,0,-159.693>,<0,-1,0>,17.5
            TARG/<-154.214,0,-159.693>,<0,-1,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
C2         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<-154.214,18.5,-159.693>,<0,1,0>,17.5
            ACTL/<-154.214,18.5,-159.693>,<0,1,0>,17.5
            TARG/<-154.214,18.5,-159.693>,<0,1,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<-1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO

SCN1       =FEAT/SET,CARTESIAN
            THEO/<-154.214,9.25,-159.693>,<0,0,1>
            ACTL/<-154.214,9.25,-159.693>,<0,0,1>
            CONSTR/SET,BASIC,C1.HIT[..],C2.HIT[..],,

C3         =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
            THEO/<-154.214,9.25,-159.693>,<0,-1,0>,17.5
            ACTL/<-154.214,9.25,-159.693>,<0,-1,0>,17.5
            CONSTR/CIRCLE,BF,2D,SCN1,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0

* 2
By the way, you can enter the points directly into the circle, the detour via "SCN" is not necessary

C4         =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
            THEO/<-154.214,9.25,-159.693>,<0,-1,0>,17.5
            ACTL/<-154.214,9.25,-159.693>,<0,-1,0>,17.5
            CONSTR/CIRCLE,BF,2D,C1.HIT[..],C2.HIT[..],,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0

* 3
which version do you have? Is it perhaps possible that in your version a circle input from a feature set is not allowed?

Reply

Henniger123 10 months ago

Hello,

this works for me =

* 1
I made the construct circle from 2D and selected the correct working plane.
Maybe your working plane is wrong, i cant see it in your post.

C1         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<-154.214,0,-159.693>,<0,-1,0>,17.5
            ACTL/<-154.214,0,-159.693>,<0,-1,0>,17.5
            TARG/<-154.214,0,-159.693>,<0,-1,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
C2         =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<-154.214,18.5,-159.693>,<0,1,0>,17.5
            ACTL/<-154.214,18.5,-159.693>,<0,1,0>,17.5
            TARG/<-154.214,18.5,-159.693>,<0,1,0>
            START ANG=0,END ANG=360
            ANGLE VEC=<-1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO

SCN1       =FEAT/SET,CARTESIAN
            THEO/<-154.214,9.25,-159.693>,<0,0,1>
            ACTL/<-154.214,9.25,-159.693>,<0,0,1>
            CONSTR/SET,BASIC,C1.HIT[..],C2.HIT[..],,

C3         =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
            THEO/<-154.214,9.25,-159.693>,<0,-1,0>,17.5
            ACTL/<-154.214,9.25,-159.693>,<0,-1,0>,17.5
            CONSTR/CIRCLE,BF,2D,SCN1,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0

* 2
By the way, you can enter the points directly into the circle, the detour via "SCN" is not necessary

C4         =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR,NO
            THEO/<-154.214,9.25,-159.693>,<0,-1,0>,17.5
            ACTL/<-154.214,9.25,-159.693>,<0,-1,0>,17.5
            CONSTR/CIRCLE,BF,2D,C1.HIT[..],C2.HIT[..],,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0

* 3
which version do you have? Is it perhaps possible that in your version a circle input from a feature set is not allowed?

Children

No Data