Any thoughts as to why this error keeps coming up? Only when dropping off a probe, not picking up. Happens for every probe change. Hit play and and the probe change continues on. I've went through and re-taught each position(3). Picks-up with no issues.
The program I'm running now is a 5 part qual repeatability study checking all 3 probes. When first excecuting the program the 200x20x3 probe was attached. Arm moves above the tool changer, stops and I get the error. Hit play to continue and it drops off the probe and picks up the one I need no problem. After the 6 angles are measured the arm moves above the tool changer again, stops and I get the error, hit play and changes with no problem. Happens again when going to get the 3rd probe. Now, when that probe is done measuring the 6 angles the probes change out with no error at all like it's supposed to.
The program I'm running now is a 5 part qual repeatability study checking all 3 probes. When first excecuting the program the 200x20x3 probe was attached. Arm moves above the tool changer, stops and I get the error. Hit play to continue and it drops off the probe and picks up the one I need no problem. After the 6 angles are measured the arm moves above the tool changer again, stops and I get the error, hit play and changes with no problem. Happens again when going to get the 3rd probe. Now, when that probe is done measuring the 6 angles the probes change out with no error at all like it's supposed to.
