Any thoughts as to why this error keeps coming up? Only when dropping off a probe, not picking up. Happens for every probe change. Hit play and and the probe change continues on. I've went through and re-taught each position(3). Picks-up with no issues.
So after 3 continuous loops without error, loop 5 errored out for each probe again. Changed the before and after setting to 75 from 60 and executed with a probe change necessary at the beginning. So far all 3 probes changed without issue. Just weird how this started after updating to newer versions.
If it makes it through all 5 loops without error I'll call this resolved.
Since your issue usually occurs when the probe is being put back into the rack, I suspect increasing the before is the issue here. After might not be, since it's fine once probe is loaded. Not sure how or why.
Since your issue usually occurs when the probe is being put back into the rack, I suspect increasing the before is the issue here. After might not be, since it's fine once probe is loaded. Not sure how or why.