Runout of Constructed Circles

Hello Great Gurus (or I guess people with many points, so lame!)

I am trying to measure the runout of a constructed circle, seemingly the Demon things I should not be doing that as its not an option on the list of features.

I am currently creating a circle at the intersection between a constructed cone and a constructed plane.

Should be right there at the bottom of the list. All of the other constructed circles are.
But to be fair, I think the last time I did this was with 2016, which would let you measure almost anything.

Any ideas?

Parents

0 Neil Challinor 10 months ago

It won't let you use a constructed intersection circle because that kind of feature doesn't have any hits - it is obtained mathematically and has perfect form. Runout looks at all of the hits from the feature and determines if they are all within the specified tolerance boundary.
Cancel
Vote Up +2 Vote Down

Sign in to reply

Verify Answer

Cancel
0 ArkansasBeeper 10 months ago in reply to Neil Challinor

Any idea for a clever work around?
Technically there is a ring of hits "near" where they want the runout taken, but for this part they really do want the runout of where the cone and plane intersect.
Maybe I can cheat and work up some pierce points from what I have. Sadly I have a feeling this part is VERY not round so It wont really be using most of the data, reducing my large dataset to just a few points.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Neil Challinor 10 months ago in reply to ArkansasBeeper

Do you have an analogue scanning probe or just touch-trigger?
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 kingsld1 10 months ago in reply to ArkansasBeeper

Level and zero on your axis of rotation. Report the polar radius of the pierce points. Subtract the largest polar radius from your smallest polar radius to get runout. To do this automatically will take some clever programming to keep track of the high and low points and to do the subtraction for you.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Reply

0 kingsld1 10 months ago in reply to ArkansasBeeper

Level and zero on your axis of rotation. Report the polar radius of the pierce points. Subtract the largest polar radius from your smallest polar radius to get runout. To do this automatically will take some clever programming to keep track of the high and low points and to do the subtraction for you.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Reject Answer

Cancel

Children

0 ArkansasBeeper 10 months ago in reply to kingsld1

That's an interesting idea. I think it would work, but not sure it would gain enough of an accuracy boost to put the time into the programming.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel

0 Neil Challinor 10 months ago in reply to ArkansasBeeper

You can use the constructed adjust filter to "move" the points onto section. The following code is an example of how to do it. I have 4 levels (20 hits per level) on a 30° incl cone. I build a constructed feature set from the third level (hits 41-60) and then apply an adjust filter to "shift" it to a cross-section height of Z=20. I then construct a circle from the adjust filter which I can then dimeson for runout. (Note: I left out some of the hits to save space)...

CYL1       =FEAT/CONTACT/CYLINDER/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<0,0,30>,<0,0,1>,6,10
            ACTL/<0,0,30>,<0,0,1>,6,10
            TARG/<0,0,30>,<0,0,1>
            START ANG=0,END ANG=360
            ANGLE VEC=<1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
            DATDEF/A,FEATURES=CYL1,,
PNT0       =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-9.464,0,12>,<-0.9659258,0,0.258819>
            ACTL/<-9.464,0,12>,<-0.9659258,0,0.258819>
            TARG/<-9.464,0,12>,<-0.9659258,0,0.258819>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT1       =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-9.001,2.925,12>,<-0.9186502,0.2984871,0.2588191>
            ACTL/<-9.001,2.925,12>,<-0.9186502,0.2984871,0.2588191>
            TARG/<-9.001,2.925,12>,<-0.9186502,0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT2       =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-7.657,5.563,12>,<-0.7814502,0.5677572,0.2588191>
            ACTL/<-7.657,5.563,12>,<-0.7814502,0.5677572,0.2588191>
            TARG/<-7.657,5.563,12>,<-0.7814502,0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO

....

PNT17      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-5.563,-7.657,12>,<-0.5677572,-0.7814502,0.2588191>
            ACTL/<-5.563,-7.657,12>,<-0.5677572,-0.7814502,0.2588191>
            TARG/<-5.563,-7.657,12>,<-0.5677572,-0.7814502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT18      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-7.657,-5.563,12>,<-0.7814502,-0.5677572,0.2588191>
            ACTL/<-7.657,-5.563,12>,<-0.7814502,-0.5677572,0.2588191>
            TARG/<-7.657,-5.563,12>,<-0.7814502,-0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT19      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-9.001,-2.925,12>,<-0.9186502,-0.2984871,0.2588191>
            ACTL/<-9.001,-2.925,12>,<-0.9186502,-0.2984871,0.2588191>
            TARG/<-9.001,-2.925,12>,<-0.9186502,-0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT20      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-7.642,-2.483,17.333>,<-0.9186502,-0.2984871,0.2588191>
            ACTL/<-7.642,-2.483,17.333>,<-0.9186502,-0.2984871,0.2588191>
            TARG/<-7.642,-2.483,17.333>,<-0.9186502,-0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT21      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-6.5,-4.723,17.333>,<-0.7814502,-0.5677572,0.2588191>
            ACTL/<-6.5,-4.723,17.333>,<-0.7814502,-0.5677572,0.2588191>
            TARG/<-6.5,-4.723,17.333>,<-0.7814502,-0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT22      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-4.723,-6.5,17.333>,<-0.5677572,-0.7814502,0.2588191>
            ACTL/<-4.723,-6.5,17.333>,<-0.5677572,-0.7814502,0.2588191>
            TARG/<-4.723,-6.5,17.333>,<-0.5677572,-0.7814502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT23      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-2.483,-7.642,17.333>,<-0.2984871,-0.9186502,0.2588191>
            ACTL/<-2.483,-7.642,17.333>,<-0.2984871,-0.9186502,0.2588191>
            TARG/<-2.483,-7.642,17.333>,<-0.2984871,-0.9186502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO

...

PNT37      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-6.5,4.723,17.333>,<-0.7814502,0.5677572,0.2588191>
            ACTL/<-6.5,4.723,17.333>,<-0.7814502,0.5677572,0.2588191>
            TARG/<-6.5,4.723,17.333>,<-0.7814502,0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT38      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-7.642,2.483,17.333>,<-0.9186502,0.2984871,0.2588191>
            ACTL/<-7.642,2.483,17.333>,<-0.9186502,0.2984871,0.2588191>
            TARG/<-7.642,2.483,17.333>,<-0.9186502,0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT39      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-8.035,0,17.333>,<-0.9659258,0,0.258819>
            ACTL/<-8.035,0,17.333>,<-0.9659258,0,0.258819>
            TARG/<-8.035,0,17.333>,<-0.9659258,0,0.258819>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT40      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-6.606,0,22.667>,<-0.9659258,0,0.258819>
            ACTL/<-6.606,0,22.667>,<-0.9659258,0,0.258819>
            TARG/<-6.606,0,22.667>,<-0.9659258,0,0.258819>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT41      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-6.283,2.041,22.667>,<-0.9186502,0.2984871,0.2588191>
            ACTL/<-6.283,2.041,22.667>,<-0.9186502,0.2984871,0.2588191>
            TARG/<-6.283,2.041,22.667>,<-0.9186502,0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT42      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-5.344,3.883,22.667>,<-0.7814502,0.5677572,0.2588191>
            ACTL/<-5.344,3.883,22.667>,<-0.7814502,0.5677572,0.2588191>
            TARG/<-5.344,3.883,22.667>,<-0.7814502,0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT43      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-3.883,5.344,22.667>,<-0.5677572,0.7814502,0.2588191>
            ACTL/<-3.883,5.344,22.667>,<-0.5677572,0.7814502,0.2588191>
            TARG/<-3.883,5.344,22.667>,<-0.5677572,0.7814502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT44      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-2.041,6.283,22.667>,<-0.2984871,0.9186502,0.2588191>
            ACTL/<-2.041,6.283,22.667>,<-0.2984871,0.9186502,0.2588191>
            TARG/<-2.041,6.283,22.667>,<-0.2984871,0.9186502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT45      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<0,6.606,22.667>,<0,0.9659258,0.258819>
            ACTL/<0,6.606,22.667>,<0,0.9659258,0.258819>
            TARG/<0,6.606,22.667>,<0,0.9659258,0.258819>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT46      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<2.041,6.283,22.667>,<0.2984871,0.9186502,0.2588191>
            ACTL/<2.041,6.283,22.667>,<0.2984871,0.9186502,0.2588191>
            TARG/<2.041,6.283,22.667>,<0.2984871,0.9186502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT47      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<3.883,5.344,22.667>,<0.5677572,0.7814502,0.2588191>
            ACTL/<3.883,5.344,22.667>,<0.5677572,0.7814502,0.2588191>
            TARG/<3.883,5.344,22.667>,<0.5677572,0.7814502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT48      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<5.344,3.883,22.667>,<0.7814502,0.5677572,0.2588191>
            ACTL/<5.344,3.883,22.667>,<0.7814502,0.5677572,0.2588191>
            TARG/<5.344,3.883,22.667>,<0.7814502,0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT49      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<6.283,2.041,22.667>,<0.9186502,0.2984871,0.2588191>
            ACTL/<6.283,2.041,22.667>,<0.9186502,0.2984871,0.2588191>
            TARG/<6.283,2.041,22.667>,<0.9186502,0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT50      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<6.606,0,22.667>,<0.9659258,0,0.258819>
            ACTL/<6.606,0,22.667>,<0.9659258,0,0.258819>
            TARG/<6.606,0,22.667>,<0.9659258,0,0.258819>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT51      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<6.283,-2.041,22.667>,<0.9186502,-0.2984871,0.2588191>
            ACTL/<6.283,-2.041,22.667>,<0.9186502,-0.2984871,0.2588191>
            TARG/<6.283,-2.041,22.667>,<0.9186502,-0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT52      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<5.344,-3.883,22.667>,<0.7814502,-0.5677572,0.2588191>
            ACTL/<5.344,-3.883,22.667>,<0.7814502,-0.5677572,0.2588191>
            TARG/<5.344,-3.883,22.667>,<0.7814502,-0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT53      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<3.883,-5.344,22.667>,<0.5677572,-0.7814502,0.2588191>
            ACTL/<3.883,-5.344,22.667>,<0.5677572,-0.7814502,0.2588191>
            TARG/<3.883,-5.344,22.667>,<0.5677572,-0.7814502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT54      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<2.041,-6.283,22.667>,<0.2984871,-0.9186502,0.2588191>
            ACTL/<2.041,-6.283,22.667>,<0.2984871,-0.9186502,0.2588191>
            TARG/<2.041,-6.283,22.667>,<0.2984871,-0.9186502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT55      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<0,-6.606,22.667>,<0,-0.9659258,0.258819>
            ACTL/<0,-6.606,22.667>,<0,-0.9659258,0.258819>
            TARG/<0,-6.606,22.667>,<0,-0.9659258,0.258819>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT56      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-2.041,-6.283,22.667>,<-0.2984871,-0.9186502,0.2588191>
            ACTL/<-2.041,-6.283,22.667>,<-0.2984871,-0.9186502,0.2588191>
            TARG/<-2.041,-6.283,22.667>,<-0.2984871,-0.9186502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT57      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-3.883,-5.344,22.667>,<-0.5677572,-0.7814502,0.2588191>
            ACTL/<-3.883,-5.344,22.667>,<-0.5677572,-0.7814502,0.2588191>
            TARG/<-3.883,-5.344,22.667>,<-0.5677572,-0.7814502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT58      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-5.344,-3.883,22.667>,<-0.7814502,-0.5677572,0.2588191>
            ACTL/<-5.344,-3.883,22.667>,<-0.7814502,-0.5677572,0.2588191>
            TARG/<-5.344,-3.883,22.667>,<-0.7814502,-0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT59      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-6.283,-2.041,22.667>,<-0.9186502,-0.2984871,0.2588191>
            ACTL/<-6.283,-2.041,22.667>,<-0.9186502,-0.2984871,0.2588191>
            TARG/<-6.283,-2.041,22.667>,<-0.9186502,-0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT60      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-4.924,-1.6,28>,<-0.9186502,-0.2984871,0.2588191>
            ACTL/<-4.924,-1.6,28>,<-0.9186502,-0.2984871,0.2588191>
            TARG/<-4.924,-1.6,28>,<-0.9186502,-0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT61      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-4.188,-3.043,28>,<-0.7814502,-0.5677572,0.2588191>
            ACTL/<-4.188,-3.043,28>,<-0.7814502,-0.5677572,0.2588191>
            TARG/<-4.188,-3.043,28>,<-0.7814502,-0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT62      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-3.043,-4.188,28>,<-0.5677572,-0.7814502,0.2588191>
            ACTL/<-3.043,-4.188,28>,<-0.5677572,-0.7814502,0.2588191>
            TARG/<-3.043,-4.188,28>,<-0.5677572,-0.7814502,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO

...

PNT77      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-4.188,3.043,28>,<-0.7814502,0.5677572,0.2588191>
            ACTL/<-4.188,3.043,28>,<-0.7814502,0.5677572,0.2588191>
            TARG/<-4.188,3.043,28>,<-0.7814502,0.5677572,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT78      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-4.924,1.6,28>,<-0.9186502,0.2984871,0.2588191>
            ACTL/<-4.924,1.6,28>,<-0.9186502,0.2984871,0.2588191>
            TARG/<-4.924,1.6,28>,<-0.9186502,0.2984871,0.2588191>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
PNT79      =FEAT/CONTACT/VECTOR POINT/DEFAULT,CARTESIAN
            THEO/<-5.177,0,28>,<-0.9659258,0,0.258819>
            ACTL/<-5.177,0,28>,<-0.9659258,0,0.258819>
            TARG/<-5.177,0,28>,<-0.9659258,0,0.258819>
            SHOW FEATURE PARAMETERS=NO
            SHOW CONTACT PARAMETERS=NO
CON1       =FEAT/CONE,CARTESIAN,OUT,LENG,NO
            THEO/<0,0,47.321>,<0,0,-1>,16,10.354,18.928
            ACTL/<0,0,47.321>,<0,0,-1>,16,10.354,18.928
            CONSTR/CONE,BFRE,PNT0,PNT79,PNT78,PNT77,PNT76,PNT75,PNT74,PNT73,PNT72,PNT71,PNT70,PNT69,PNT68,PNT67,PNT66,PNT65,PNT64,PNT63,PNT62,PNT61,PNT60,PNT59,PNT58,PNT57,PNT56,PNT55,PNT54,PNT53,PNT52,PNT51,PNT50,PNT49,PNT48,PNT47,PNT46,PNT45,PNT44,
                             PNT43,PNT42,PNT41,PNT40,PNT39,PNT38,PNT37,PNT36,PNT35,PNT34,PNT33,PNT32,PNT31,PNT30,PNT29,PNT28,PNT27,PNT26,PNT25,PNT24,PNT23,PNT22,PNT21,PNT20,PNT19,PNT18,PNT17,PNT16,PNT15,PNT14,PNT13,PNT12,PNT11,PNT10,PNT9,PNT8,PNT7,$
                             PNT6,PNT5,PNT4,PNT3,PNT2,PNT1,,
SCN1       =FEAT/SET,CARTESIAN
            THEO/<0.084,-0.08,22.933>,<0,0,1>
            ACTL/<0.084,-0.08,22.933>,<0,0,1>
            CONSTR/SET,BASIC,PNT41,PNT60,PNT59,PNT58,PNT57,PNT56,PNT55,PNT54,PNT53,PNT52,PNT51,PNT50,PNT49,PNT48,PNT47,PNT46,PNT45,PNT44,PNT43,PNT42,,
SCN2       =FEAT/SET,CARTESIAN
            THEO/<0.084,-0.08,22.933>,<0,0,1>
            ACTL/<0.018,-0.113,20>,<0,0,1>
            CONSTR/SET,ADJUSTFILTER,CONE,RADIAL,30,SCN1,CON1,SHOW HITS=NO
            FEATURE/0,0,47.321,<0,0,-1>
            PLANE/0,0,20,<0,0,1>
CIR1       =FEAT/CIRCLE,CARTESIAN,OUT,LEAST_SQR,YES
            THEO/<0,0,20>,<0,0,1>,13.071
            ACTL/<0,0,20>,<0,0,1>,14.641
            CONSTR/CIRCLE,BF,2D,SCN2,,
            OUTLIER_REMOVAL/OFF,3
            FILTER/OFF,UPR=0
FCFRNOUT1  =GEOMETRIC_TOLERANCE/STANDARD=ASME Y14.5,SHOWEXPANDED=YES,
            DESCRIPTION=ON,,
            DATUM_MATH=DEFAULT,
            UNITS=MM,OUTPUT=BOTH,ARROWDENSITY=100,
            SEGMENT_1,CIRCULAR_RUNOUT,0.01,A,<dat>,
            TEXT=OFF,CADGRAPH=ON,REPORTGRAPH=OFF,MULT=100,
              NOMINAL:
                HALF ANGLE=15,
              MEASURED:
                CIR1:0.000,
            DATUMS/REPORTDATUMSIZE=ON,
              A(CYL1):NOM=6,+Tol=0.01,-Tol=0.01,
            FEATURES/CIR1,,

0 ArkansasBeeper 10 months ago in reply to Neil Challinor

Oh that looks pretty good Neil Challinor
I will give that a shot and report back.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Neil Challinor 10 months ago in reply to ArkansasBeeper

Keep in mind, the more points you can take and the closer you can measure your points to the real section height, the more accurate it will be.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 ArkansasBeeper 9 months ago in reply to Neil Challinor

Well finally back to this after the new year! The Demon is not liking this process, keep getting illegal input errors.
I can't seem to find a way to DM you to prevent my code failures from being aired in public
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel
0 Neil Challinor 9 months ago in reply to ArkansasBeeper

In order to send private messages, you have to first "connect". I just sent you a friendship request which, one you accept, should allow us to message each other.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Verify Answer

Cancel