ClearenceCube doesn'tt disappear when i do snapshot

Is the snapshot set to "Live" or "Static"?

Nothing changes in either mode

i also tried 2023.2 SP2 and SP3, both negative

Did you try what my post above says? It may have changed in 2023.2. I am using 2021.2

Yes I have, it actually works in 2021.1 and not in 2023.2...

You have 2021.1 installed and it works in that version of PC-DMIS?

Sorry it was on 2021.2 

and yes there it works fine

I see almost no changes to how "Snapshot" works in the release notes except for this one in 2023.2

•PC-DMIS now correctly shows or hides the annotation points in the custom report
as per the viewset when you use the SNAPSHOT command to generate a report.
See PCD-242749.

I have not messed with viewsets, but if you go to Insert > Report Command > Viewset then try your snapshots does that do anything? I can't try as I do not have 2023.2

https://docs.hexagonmi.com/pcdmis/2023.2/en/helpcenter/mergedProjects/core/24_report_topics/Inserting_Snapshots.htm

The help file has also changed since 2021.2 slightly.

https://docs.hexagonmi.com/pcdmis/2023.2/en/helpcenter/mergedProjects/core/24_report_topics/Inserting_Snapshots.htm

The help file has also changed since 2021.2 slightly.