Hi all,
I am trying two run (10)pieces, (5) on each row and I am able to run the initial (5) ok but when I go to my second line of parts it is still utilizing the "clearp" code from the first set and it would definitely crash.
Is there any way to set a new clearance plane for the second row of parts?
STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES
ALIGNMENT/END
MODE/MANUAL
PREHIT/0.05
RETRACT/0.05
MOVESPEED/ 200
MANRETRACT/0.05
FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, ,
LOADPROBE/(5)_1PNT5X20MM_STAR
TIP/T3A0B0, SHANKIJK=0, -1, 0, ANGLE=0
$$ NO,
PROGRAMMED BY: AUSTIN V
PROGRAMMED DATE: 2/2/2024
COMMENT/OPER,NO,FULL SCREEN=YES,AUTO-CONTINUE=NO,OVC=NO,
PART SETUP:
STANDOFF BUILD:
(1) 0.50 X 1.00" ADJUSTABLE STANDOFF (R-AJ-50-2) + (1) 0.75" X 1.00" V-STANDOFF (R-MV-75-20)
BUILD (10) STANDOFFS AND PLACE @ G/S3, G/S10, G/S17, G/S24, & G/S31
PLACE PARTS ON V BLOCK WITH (2) MAKING CONTACT & (1) TOOTH @ 12 O'CLOCK
ALIGN TO PART LOCATED @G3
V2 =LOOP/START,ID=YES,NUMBER=2,START=1,SKIP=,
OFFSET:XAXIS=0,YAXIS=6,ZAXIS=0,ANGLE=0
V1 =LOOP/START,ID=YES,NUMBER=5,START=1,SKIP=,
OFFSET:XAXIS=3.5,YAXIS=0,ZAXIS=0,ANGLE=0
PRINT/REPORT,EXEC MODE=END,$
TO_FILE=OFF,AUTO=1,AUTO OPEN=OFF,$
TO_PRINTER=OFF,COPIES=1,$
TO_DMIS_REPORT=OFF,FILE_OPTION=INDEX,FILENAME=,$
REPORT_THEORETICALS=NONE,REPORT_FEATURE_WITH_DIMENSIONS=NO,$
TO_EXCEL=OFF,$
PREVIOUS_RUNS=DELETE_INSTANCES
WORKPLANE/YPLUS
PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE
THEO/<1.9998,3.005,3.4821>,<0,-1,0>
ACTL/<1.9998,3.005,3.4821>,<0,-1,0>
MEAS/PLANE,4
HIT/BASIC,NORMAL,<1.9964,3.005,3.6558>,<0,-1,0>,<1.9964,3.005,3.6558>,USE THEO=YES
HIT/BASIC,NORMAL,<1.8207,3.005,3.4828>,<0,-1,0>,<1.8207,3.005,3.4828>,USE THEO=YES
HIT/BASIC,NORMAL,<1.9937,3.005,3.3097>,<0,-1,0>,<1.9937,3.005,3.3097>,USE THEO=YES
HIT/BASIC,NORMAL,<2.1886,3.005,3.48>,<0,-1,0>,<2.1886,3.005,3.48>,USE THEO=YES
ENDMEAS/
CIR1 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR
THEO/<2,3.194,3.4803>,<0,1,0>,0.219
ACTL/<2,3.194,3.4803>,<0,1,0>,0.219
MEAS/CIRCLE,4,YPLUS
HIT/BASIC,NORMAL,<2.1095,3.1271,3.477>,<-0.9995286,0,0.0307027>,<2.1095,3.1271,3.477>,USE THEO=YES
HIT/BASIC,NORMAL,<2.0023,3.2363,3.3709>,<-0.0204772,0,0.9997903>,<2.0023,3.2363,3.3709>,USE THEO=YES
HIT/BASIC,NORMAL,<1.8906,3.2235,3.4775>,<0.999656,0,0.026229>,<1.8906,3.2235,3.4775>,USE THEO=YES
HIT/BASIC,NORMAL,<1.9926,3.1892,3.5896>,<0.0679513,0,-0.9976886>,<1.9926,3.1892,3.5896>,USE THEO=YES
ENDMEAS/
A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES
ALIGNMENT/LEVEL,YMINUS,PLN1
ALIGNMENT/TRANS,YAXIS,PLN1
ALIGNMENT/TRANS,ZAXIS,CIR1
ALIGNMENT/TRANS,XAXIS,CIR1
ALIGNMENT/END
MODE/DCC
CLEARP/YPLUS,-0.18,ZPLUS,0,ON
MOVE/CLEARPLANE
PREHIT/0.1
RETRACT/0.1
PLN2 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/<0,0,0>,<0,-1,0>
ACTL/<0,0,0>,<0,-1,0>
TARG/<0,0,0>,<0,-1,0>
ANGLE VEC=<0,0,1>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
A2 =ALIGNMENT/START,RECALL:A1,LIST=YES
ALIGNMENT/LEVEL,YMINUS,PLN2
ALIGNMENT/TRANS,YAXIS,PLN2
ALIGNMENT/END
CLEARP/YPLUS,-0.08,ZPLUS,0,ON
MOVE/CLEARPLANE
CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<0,0.02,0>,<0,-1,0>,0.466,0
ACTL/<0,0.02,0>,<0,-1,0>,0.466,0
TARG/<0,0.02,0>,<0,-1,0>
START ANG=45,END ANG=405
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
A3 =ALIGNMENT/START,RECALL:A2,LIST=YES
ALIGNMENT/LEVEL,YMINUS,PLN2
ALIGNMENT/TRANS,YAXIS,PLN2
ALIGNMENT/TRANS,ZAXIS,CIR2
ALIGNMENT/TRANS,XAXIS,CIR2
ALIGNMENT/END
PREHIT/0.05
RETRACT/0.05
A DATUM =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,OUT,LEAST_SQR
THEO/<0,0.02,0>,<0,-1,0>,0.466,-0.6664
ACTL/<0,0.02,0>,<0,-1,0>,0.466,-0.6664
TARG/<0,0.02,0>,<0,-1,0>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
PLN3 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/<0,0.715,0>,<0,-1,0>
ACTL/<0,0.715,0>,<0,-1,0>
TARG/<0,0.715,0>,<0,-1,0>
ANGLE VEC=<0.9889364,0,-0.1483405>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
MOVE/CLEARPLANE
CON1 =FEAT/CONTACT/CONE/DEFAULT,CARTESIAN,IN
THEO/<0,0.0528,0>,<0,-1,0>,60,0.0528,0.219
ACTL/<0,0.0528,0>,<0,-1,0>,60,0.0528,0.219
TARG/<0,0.0528,0>,<0,-1,0>
START ANG=-45,END ANG=315
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
MOVE/CLEARPLANE
CYL1 =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
THEO/<0,0.0528,0>,<0,-1,0>,0.219,1.9394
ACTL/<0,0.0528,0>,<0,-1,0>,0.219,1.9394
TARG/<0,0.0528,0>,<0,-1,0>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
MOVE/CLEARPLANE
CIR9 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<0,0.715,0>,<0,-1,0>,0.9288,0
ACTL/<0,0.715,0>,<0,-1,0>,0.9288,0
TARG/<0,0.715,0>,<0,-1,0>
START ANG=-8.3,END ANG=351.7
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
MOVE/INCREMENT,<-1.5,0,0>
TIP/T5A0B0, SHANKIJK=0, 1, 0, ANGLE=0
CLEARP/YPLUS,1.215,ZPLUS,0,ON
MOVE/CLEARPLANE
CIR3 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR
THEO/<0,1.275,0>,<0,1,0>,0.9288,0
ACTL/<0,1.275,0>,<0,1,0>,0.9288,0
TARG/<0,1.275,0>,<0,1,0>
START ANG=-8.3,END ANG=351.7
ANGLE VEC=<-1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CLEARP/YPLUS,1.355,ZPLUS,0,ON
MOVE/CLEARPLANE
PLN4 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/<0,1.275,0>,<0,1,0>
ACTL/<0,1.275,0>,<0,1,0>
TARG/<0,1.275,0>,<0,1,0>
ANGLE VEC=<0.9889364,0,-0.1483405>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CYL2 =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,OUT,LEAST_SQR
THEO/<0,1.2953,0>,<0,1,0>,0.466,0.7297
ACTL/<0,1.2953,0>,<0,1,0>,0.466,0.7297
TARG/<0,1.2953,0>,<0,1,0>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CLEARP/YPLUS,2.125,ZPLUS,0,ON
MOVE/CLEARPLANE
PLN5 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR
THEO/<0,2.045,0>,<0,1,0>
ACTL/<0,2.045,0>,<0,1,0>
TARG/<0,2.045,0>,<0,1,0>
ANGLE VEC=<1,0,0>,RADIAL
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
MOVE/CLEARPLANE
CON2 =FEAT/CONTACT/CONE/DEFAULT,CARTESIAN,IN
THEO/<0,2.045,0>,<0,1,0>,60,-0.0528,0.28
ACTL/<0,2.045,0>,<0,1,0>,60,-0.0528,0.28
TARG/<0,2.045,0>,<0,1,0>
START ANG=0,END ANG=360
ANGLE VEC=<1,0,0>
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
CYL3 =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR
THEO/<0,1.9922,0>,<0,1,0>,0.219,1.9394
ACTL/<0,1.9922,0>,<0,1,0>,0.219,1.9394
TARG/<0,1.9922,0>,<0,1,0>
START ANG=0,END ANG=360
ANGLE VEC=<-1,0,0>
DIRECTION=CCW
SHOW FEATURE PARAMETERS=NO
SHOW CONTACT PARAMETERS=NO
MOVE/CLEARPLANE
MOVE/INCREMENT,<0,0,3>
PRINT/REPORT,EXEC MODE=END,$
TO_FILE=ON,AUTO=1,AUTO OPEN=OFF,$
TO_PRINTER=OFF,COPIES=1,$
TO_DMIS_REPORT=OFF,FILE_OPTION=INDEX,FILENAME=,$
REPORT_THEORETICALS=NONE,REPORT_FEATURE_WITH_DIMENSIONS=YES,$
TO_EXCEL=ON,AUTO=1,FILENAME=C:\Users\avanbenschoten\2684589_OP550_LOOP_10 - D.XLSX,AUTO OPEN=ON,$
PREVIOUS_RUNS=KEEP_INSTANCES
COMMENT/REPT,
**********************
BALLOON #
**********************
LOOP/END
LOOP/END
