Hi all,
I am trying two run (10)pieces, (5) on each row and I am able to run the initial (5) ok but when I go to my second line of parts it is still utilizing the "clearp" code from the first set and it would definitely crash.
Is there any way to set a new clearance plane for the second row of parts?
STARTUP =ALIGNMENT/START,RECALL:USE_PART_SETUP,LIST=YES ALIGNMENT/END MODE/MANUAL PREHIT/0.05 RETRACT/0.05 MOVESPEED/ 200 MANRETRACT/0.05 FORMAT/TEXT,OPTIONS, ,HEADINGS,SYMBOLS, ;NOM,TOL,MEAS,DEV,OUTTOL, , LOADPROBE/(5)_1PNT5X20MM_STAR TIP/T3A0B0, SHANKIJK=0, -1, 0, ANGLE=0 $$ NO, PROGRAMMED BY: AUSTIN V PROGRAMMED DATE: 2/2/2024 COMMENT/OPER,NO,FULL SCREEN=YES,AUTO-CONTINUE=NO,OVC=NO, PART SETUP: STANDOFF BUILD: (1) 0.50 X 1.00" ADJUSTABLE STANDOFF (R-AJ-50-2) + (1) 0.75" X 1.00" V-STANDOFF (R-MV-75-20) BUILD (10) STANDOFFS AND PLACE @ G/S3, G/S10, G/S17, G/S24, & G/S31 PLACE PARTS ON V BLOCK WITH (2) MAKING CONTACT & (1) TOOTH @ 12 O'CLOCK ALIGN TO PART LOCATED @G3 V2 =LOOP/START,ID=YES,NUMBER=2,START=1,SKIP=, OFFSET:XAXIS=0,YAXIS=6,ZAXIS=0,ANGLE=0 V1 =LOOP/START,ID=YES,NUMBER=5,START=1,SKIP=, OFFSET:XAXIS=3.5,YAXIS=0,ZAXIS=0,ANGLE=0 PRINT/REPORT,EXEC MODE=END,$ TO_FILE=OFF,AUTO=1,AUTO OPEN=OFF,$ TO_PRINTER=OFF,COPIES=1,$ TO_DMIS_REPORT=OFF,FILE_OPTION=INDEX,FILENAME=,$ REPORT_THEORETICALS=NONE,REPORT_FEATURE_WITH_DIMENSIONS=NO,$ TO_EXCEL=OFF,$ PREVIOUS_RUNS=DELETE_INSTANCES WORKPLANE/YPLUS PLN1 =FEAT/PLANE,CARTESIAN,TRIANGLE THEO/<1.9998,3.005,3.4821>,<0,-1,0> ACTL/<1.9998,3.005,3.4821>,<0,-1,0> MEAS/PLANE,4 HIT/BASIC,NORMAL,<1.9964,3.005,3.6558>,<0,-1,0>,<1.9964,3.005,3.6558>,USE THEO=YES HIT/BASIC,NORMAL,<1.8207,3.005,3.4828>,<0,-1,0>,<1.8207,3.005,3.4828>,USE THEO=YES HIT/BASIC,NORMAL,<1.9937,3.005,3.3097>,<0,-1,0>,<1.9937,3.005,3.3097>,USE THEO=YES HIT/BASIC,NORMAL,<2.1886,3.005,3.48>,<0,-1,0>,<2.1886,3.005,3.48>,USE THEO=YES ENDMEAS/ CIR1 =FEAT/CIRCLE,CARTESIAN,IN,LEAST_SQR THEO/<2,3.194,3.4803>,<0,1,0>,0.219 ACTL/<2,3.194,3.4803>,<0,1,0>,0.219 MEAS/CIRCLE,4,YPLUS HIT/BASIC,NORMAL,<2.1095,3.1271,3.477>,<-0.9995286,0,0.0307027>,<2.1095,3.1271,3.477>,USE THEO=YES HIT/BASIC,NORMAL,<2.0023,3.2363,3.3709>,<-0.0204772,0,0.9997903>,<2.0023,3.2363,3.3709>,USE THEO=YES HIT/BASIC,NORMAL,<1.8906,3.2235,3.4775>,<0.999656,0,0.026229>,<1.8906,3.2235,3.4775>,USE THEO=YES HIT/BASIC,NORMAL,<1.9926,3.1892,3.5896>,<0.0679513,0,-0.9976886>,<1.9926,3.1892,3.5896>,USE THEO=YES ENDMEAS/ A1 =ALIGNMENT/START,RECALL:STARTUP,LIST=YES ALIGNMENT/LEVEL,YMINUS,PLN1 ALIGNMENT/TRANS,YAXIS,PLN1 ALIGNMENT/TRANS,ZAXIS,CIR1 ALIGNMENT/TRANS,XAXIS,CIR1 ALIGNMENT/END MODE/DCC CLEARP/YPLUS,-0.18,ZPLUS,0,ON MOVE/CLEARPLANE PREHIT/0.1 RETRACT/0.1 PLN2 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR THEO/<0,0,0>,<0,-1,0> ACTL/<0,0,0>,<0,-1,0> TARG/<0,0,0>,<0,-1,0> ANGLE VEC=<0,0,1>,RADIAL SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO A2 =ALIGNMENT/START,RECALL:A1,LIST=YES ALIGNMENT/LEVEL,YMINUS,PLN2 ALIGNMENT/TRANS,YAXIS,PLN2 ALIGNMENT/END CLEARP/YPLUS,-0.08,ZPLUS,0,ON MOVE/CLEARPLANE CIR2 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR THEO/<0,0.02,0>,<0,-1,0>,0.466,0 ACTL/<0,0.02,0>,<0,-1,0>,0.466,0 TARG/<0,0.02,0>,<0,-1,0> START ANG=45,END ANG=405 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO A3 =ALIGNMENT/START,RECALL:A2,LIST=YES ALIGNMENT/LEVEL,YMINUS,PLN2 ALIGNMENT/TRANS,YAXIS,PLN2 ALIGNMENT/TRANS,ZAXIS,CIR2 ALIGNMENT/TRANS,XAXIS,CIR2 ALIGNMENT/END PREHIT/0.05 RETRACT/0.05 A DATUM =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,OUT,LEAST_SQR THEO/<0,0.02,0>,<0,-1,0>,0.466,-0.6664 ACTL/<0,0.02,0>,<0,-1,0>,0.466,-0.6664 TARG/<0,0.02,0>,<0,-1,0> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO PLN3 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR THEO/<0,0.715,0>,<0,-1,0> ACTL/<0,0.715,0>,<0,-1,0> TARG/<0,0.715,0>,<0,-1,0> ANGLE VEC=<0.9889364,0,-0.1483405>,RADIAL SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MOVE/CLEARPLANE CON1 =FEAT/CONTACT/CONE/DEFAULT,CARTESIAN,IN THEO/<0,0.0528,0>,<0,-1,0>,60,0.0528,0.219 ACTL/<0,0.0528,0>,<0,-1,0>,60,0.0528,0.219 TARG/<0,0.0528,0>,<0,-1,0> START ANG=-45,END ANG=315 ANGLE VEC=<1,0,0> SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MOVE/CLEARPLANE CYL1 =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR THEO/<0,0.0528,0>,<0,-1,0>,0.219,1.9394 ACTL/<0,0.0528,0>,<0,-1,0>,0.219,1.9394 TARG/<0,0.0528,0>,<0,-1,0> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MOVE/CLEARPLANE CIR9 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR THEO/<0,0.715,0>,<0,-1,0>,0.9288,0 ACTL/<0,0.715,0>,<0,-1,0>,0.9288,0 TARG/<0,0.715,0>,<0,-1,0> START ANG=-8.3,END ANG=351.7 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MOVE/INCREMENT,<-1.5,0,0> TIP/T5A0B0, SHANKIJK=0, 1, 0, ANGLE=0 CLEARP/YPLUS,1.215,ZPLUS,0,ON MOVE/CLEARPLANE CIR3 =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,OUT,LEAST_SQR THEO/<0,1.275,0>,<0,1,0>,0.9288,0 ACTL/<0,1.275,0>,<0,1,0>,0.9288,0 TARG/<0,1.275,0>,<0,1,0> START ANG=-8.3,END ANG=351.7 ANGLE VEC=<-1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO CLEARP/YPLUS,1.355,ZPLUS,0,ON MOVE/CLEARPLANE PLN4 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR THEO/<0,1.275,0>,<0,1,0> ACTL/<0,1.275,0>,<0,1,0> TARG/<0,1.275,0>,<0,1,0> ANGLE VEC=<0.9889364,0,-0.1483405>,RADIAL SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO CYL2 =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,OUT,LEAST_SQR THEO/<0,1.2953,0>,<0,1,0>,0.466,0.7297 ACTL/<0,1.2953,0>,<0,1,0>,0.466,0.7297 TARG/<0,1.2953,0>,<0,1,0> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO CLEARP/YPLUS,2.125,ZPLUS,0,ON MOVE/CLEARPLANE PLN5 =FEAT/CONTACT/PLANE/DEFAULT,CARTESIAN,NONE,LEAST_SQR THEO/<0,2.045,0>,<0,1,0> ACTL/<0,2.045,0>,<0,1,0> TARG/<0,2.045,0>,<0,1,0> ANGLE VEC=<1,0,0>,RADIAL SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MOVE/CLEARPLANE CON2 =FEAT/CONTACT/CONE/DEFAULT,CARTESIAN,IN THEO/<0,2.045,0>,<0,1,0>,60,-0.0528,0.28 ACTL/<0,2.045,0>,<0,1,0>,60,-0.0528,0.28 TARG/<0,2.045,0>,<0,1,0> START ANG=0,END ANG=360 ANGLE VEC=<1,0,0> SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO CYL3 =FEAT/CONTACT/CYLINDER/ADAPTIVE_CYLINDER_CONCENTRIC_CIRCLE_SCAN,CARTESIAN,IN,LEAST_SQR THEO/<0,1.9922,0>,<0,1,0>,0.219,1.9394 ACTL/<0,1.9922,0>,<0,1,0>,0.219,1.9394 TARG/<0,1.9922,0>,<0,1,0> START ANG=0,END ANG=360 ANGLE VEC=<-1,0,0> DIRECTION=CCW SHOW FEATURE PARAMETERS=NO SHOW CONTACT PARAMETERS=NO MOVE/CLEARPLANE MOVE/INCREMENT,<0,0,3> PRINT/REPORT,EXEC MODE=END,$ TO_FILE=ON,AUTO=1,AUTO OPEN=OFF,$ TO_PRINTER=OFF,COPIES=1,$ TO_DMIS_REPORT=OFF,FILE_OPTION=INDEX,FILENAME=,$ REPORT_THEORETICALS=NONE,REPORT_FEATURE_WITH_DIMENSIONS=YES,$ TO_EXCEL=ON,AUTO=1,FILENAME=C:\Users\avanbenschoten\2684589_OP550_LOOP_10 - D.XLSX,AUTO OPEN=ON,$ PREVIOUS_RUNS=KEEP_INSTANCES COMMENT/REPT, ********************** BALLOON # ********************** LOOP/END LOOP/END