PC-DMIS 2022.2 not retaining settings

Sounds like PC_DMIS hasn't got permission to edit the settings.  Did you make sure you ran it as administrator after installing? 

 Neil Challinor Yes... it's worked fine for 11 months but today it wants to act up!!!

This machine is actually part of an automated machining center.  It's not on an outside network nor connected to internet.  

The clearpoint is used to take the CMM to the park position.  The cell was in cycle and actually ran 47 parts before messing the bed.  On part 48 the clearpoint was reset to XYZ 0 .

The homepage was just an observation, not sure it's really contributing anything to the clearpoint issue.

I would check with your IT dept that they definitely didn't change anything recently.  All of the symptoms you describe point to PC-DMIS not having permission to store settings.  2022.2 stores it's setting in the following files...

.

C:\ProgramData\Hexagon\PC-DMIS\2022.2\DefaultSettings.json

C:\ProgramData\Hexagon\PC-DMIS\2022.2\SystemSettings.json

C:\ProgramData\Hexagon\PC-DMIS\2022.2\License.json

C:\Users\UserName\AppData\Local\Hexagon\PC-DMIS\2022.2\UserSettings.json

.

Make sure PC-DMIS has full read/write permission for all of them.

I would check with your IT dept that they definitely didn't change anything recently.  All of the symptoms you describe point to PC-DMIS not having permission to store settings.  2022.2 stores it's setting in the following files...

.

C:\ProgramData\Hexagon\PC-DMIS\2022.2\DefaultSettings.json

C:\ProgramData\Hexagon\PC-DMIS\2022.2\SystemSettings.json

C:\ProgramData\Hexagon\PC-DMIS\2022.2\License.json

C:\Users\UserName\AppData\Local\Hexagon\PC-DMIS\2022.2\UserSettings.json

.

Make sure PC-DMIS has full read/write permission for all of them.

Does 2021.2 Store them in a similar fashion? I see a UserSettings.json, but it is blank, 0kb. Do I need to do something to have it display my settings?

2021.2 uses the windows registry to store settings.  However, the development team was testing ways of migrating those settings to the new .json method during that development cycle so that is probably why you see an empty file on your system.

So, I found a backup I had made with settings editor back in May.  Figured I had nothing to lose since the machine wasn't working correctly anyway so I restored from the backup and all is well again!