hexagon logo
Register Sign in
  • Replies 4 replies
  • Subscribers 31 subscribers
  • Views 60 views
  • Users 0 members are here
Options
Related

alignment question on Romer

Clementine
I am trying to align a part on our Romer and the print is not the greatest in geometric callouts. Please review attached print.
I have 3 cylinders as Datums. I have not aligned a part using all cylinders and would appreciate help. Print is difficult.

I have the A datum facing up in the Z axis on the table.

I am thinking I need to create an origin for X and Y at the intersection of A and C. and call that a different datum. I am thinking the alignment would be.


Level: A +/-X,Y, or Z Zplus

Rotate: C +/-X,Y, or Z X plus

Origins:
X: c

Y: c

Z: A


Thank you for advice.
Attached Files
Parents
  • I would create cyl A from the bottom ID to the top ID have the Z axis vertex going upward.
    I would also create cyl C from the base of the flange OD to the top OD edge. The cyl C would be facing the X minus direction.
    Did I answer my own question?

    So the rotate would be Cyl C rotate Xminus. Right?????
Reply
  • I would create cyl A from the bottom ID to the top ID have the Z axis vertex going upward.
    I would also create cyl C from the base of the flange OD to the top OD edge. The cyl C would be facing the X minus direction.
    Did I answer my own question?

    So the rotate would be Cyl C rotate Xminus. Right?????
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement