hexagon logo
Register Sign in
  • Replies 3 replies
  • Subscribers 31 subscribers
  • Views 50 views
  • Users 0 members are here
Options
Related

Roller Alignment AT401

Mikek
Need some help on doing roller alignment, have (2) programs one lets me check roll alignment to baseline - works until I move tracker and use recheck baseline to continue checking rolls. Here I loose ref. and when I check a roll that has been checked before the Horizontal alignment error is way out from previous check.

The other program Roller Alignment 2.0 lets me check rolls with a baseline perpendicular or parallel to rolls but I have not found out how to move tracker with bundle and continue checking the other rolls.

Still playing with programs but could use some tips. PC-DMIS 2013

Mike
Parents
  • Yes, the bundle option should go away when you are running/rerunning a program that you wrote. The only thing I can think of off the top of my head with a basic understanding of what you are trying to measure/accomplish is to write programs that are in line with the amount of rollers you are trying to inspect. Essentially you might have to re-bundle a couple times to get what you need (keep in mind you do get some stackup error the more times that you bundle). So you could measure one roller and end, save the program as something else, and then basically start adding to that program. Maybe have a program called 8 rollers or something. I am sure there are some other solutions, but without seeing it in person it is hard for me to give you a better option.
Reply
  • Yes, the bundle option should go away when you are running/rerunning a program that you wrote. The only thing I can think of off the top of my head with a basic understanding of what you are trying to measure/accomplish is to write programs that are in line with the amount of rollers you are trying to inspect. Essentially you might have to re-bundle a couple times to get what you need (keep in mind you do get some stackup error the more times that you bundle). So you could measure one roller and end, save the program as something else, and then basically start adding to that program. Maybe have a program called 8 rollers or something. I am sure there are some other solutions, but without seeing it in person it is hard for me to give you a better option.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement