Bad code

Can someone tell me what is wrong with this code: ASSIGN/V3=DIMB.X.MEAS-DIMV1.MEAS

Im trying to assign V3 to equal the measured value for dimension B in the x-axis minus dimension V1. V1 is a keyed in value.

Any help would be appreciated.

Parents

John Kingston over 10 years ago

Thanks, I was wondering what I did wrong. Here ya go

[COLOR="#FF0000"]DIM V1[/COLOR]= KEYED IN DIMENSION OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
M 6.350 1.000 1.000 6.350 0.000 0.000 ----#----
DIM B= 2D DISTANCE FROM PLANE PLN5 TO PLANE PLN1 PAR TO XAXIS,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
M 88.940 1.000 1.000 88.969 0.029 0.000 ----#----
ASSIGN/V3=DIMB.X.MEAS-[COLOR="#FF0000"]DIMV1[/COLOR].MEAS

See the difference there in red?

Reply

John Kingston over 10 years ago

Thanks, I was wondering what I did wrong. Here ya go

[COLOR="#FF0000"]DIM V1[/COLOR]= KEYED IN DIMENSION OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
M 6.350 1.000 1.000 6.350 0.000 0.000 ----#----
DIM B= 2D DISTANCE FROM PLANE PLN5 TO PLANE PLN1 PAR TO XAXIS,NO_RADIUS UNITS=MM,$
GRAPH=OFF TEXT=OFF MULT=10.00 OUTPUT=BOTH
AX NOMINAL +TOL -TOL MEAS DEV OUTTOL
M 88.940 1.000 1.000 88.969 0.029 0.000 ----#----
ASSIGN/V3=DIMB.X.MEAS-[COLOR="#FF0000"]DIMV1[/COLOR].MEAS

See the difference there in red?

Children

No Data