Your Products have been synced, click here to refresh
I do not think that PC-DMIS currently supports this. Whatever this surface is, take a grid of points at less than 50mm spacing, then you can create groups of features that are slightly less than 100 by 100 square that you can dimension. (ie, at 49mm spacing, you could have 9 points at 98 x 98 per square.)
What standard are you working to?
That looks like a flatness callout to the 2009 ANSI not angularity
Exact-measure flatness will support the 100 X 100 Flatness per Unit
Rich, I think you're right on this. It didn't click when I originally replied. I took a second look through the Form and Orientation sections, and couldn't find "per area" in reference to Angularity at all. Conceptually, it could work. Angularity also controls flatness, but flatness should, if critical, be controlled as a refinement of the angularity. So, this callout, is not likely to be a valid (to the text) callout.
© 2024 Hexagon AB and/or its subsidiaries. | Privacy Policy | Cloud Services Agreement |