How do I set this value (see Picture) in PC-dmis 2013 SP5? I've tried to create both planes and geometrical sets but the dimension feature Control frame window won't show me the "2,6/100x100" option Can anyone help me?
What standard are you working to? That looks like a flatness callout to the 2009 ANSI not angularity
Exact-measure flatness will support the 100 X 100 Flatness per Unit
Rich, I think you're right on this. It didn't click when I originally replied. I took a second look through the Form and Orientation sections, and couldn't find "per area" in reference to Angularity at all. Conceptually, it could work. Angularity also controls flatness, but flatness should, if critical, be controlled as a refinement of the angularity. So, this callout, is not likely to be a valid (to the text) callout.
What standard are you working to? That looks like a flatness callout to the 2009 ANSI not angularity
Exact-measure flatness will support the 100 X 100 Flatness per Unit
Rich, I think you're right on this. It didn't click when I originally replied. I took a second look through the Form and Orientation sections, and couldn't find "per area" in reference to Angularity at all. Conceptually, it could work. Angularity also controls flatness, but flatness should, if critical, be controlled as a refinement of the angularity. So, this callout, is not likely to be a valid (to the text) callout.
Can anyone help me?
