True position bad math

Either I'm having a huge brainfart or PC-DMIS has a new bug after this last update (2017 R2 SP9). Look at the actual hole locations and then look at the positions. I don't know what kind of common core math it's doing to get those numbers.

The only factor that I can think of, which shouldn't be a factor at all, is that each cylinder is constructed out of two circles. The Z nominal of the bottom circle is at the bottom of the part with a vector of 0,0,-1, as I intended to get a full length cylinder. As it turned out, I was unable to reach the bottom of the part and instead took it from the top at a much shallower depth with a vector of 0,0,1. I don't see how this would affect anything but it's the only thing I can think of.

Parents

Numbers Game over 6 years ago

Code snippet for CYL_24_11:

CIR_24_11T =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<65,30,0>,<0,0,1>,24
            ACTL/<65.044,29.893,0>,<0,0,1>,24.161
            TARG/<65,30,0>,<0,0,1>
            START ANG=0,END ANG=360
            ANGLE VEC=<1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=5,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=0,SPACER=0
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<77,30,-3>,<-1,0,0>,<72.423,20.339,-2.931>
              HIT/BASIC,<68.708,41.413,-3>,<-0.309017,-0.9510565,0>,<76.475,33.777,-2.954>
              HIT/BASIC,<55.292,37.053,-3>,<0.809017,-0.5877853,0>,<66.822,41.871,-2.509>
              HIT/BASIC,<55.292,22.947,-3>,<0.809017,0.5877853,0>,<55.307,36.981,-2.494>
              HIT/BASIC,<68.708,18.587,-3>,<-0.309017,0.9510565,0>,<54.172,24.571,-2.029>
            ENDMEAS/
CIR_24_11B =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<65,30,-206>,<0,0,-1>,24
            ACTL/<65.085,29.986,-206>,<0,0,-1>,24.103
            TARG/<65,30,-206>,<0,0,-1>
            START ANG=0,END ANG=360
            ANGLE VEC=<-1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=5,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=0,SPACER=0
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<53,30,-203>,<1,0,0>,<72.111,20.2,-9.334>
              HIT/BASIC,<61.292,41.413,-203>,<0.309017,-0.9510565,0>,<77.032,31.523,-8.24>
              HIT/BASIC,<74.708,37.053,-203>,<-0.809017,-0.5877853,0>,<67.597,41.791,-8.941>
              HIT/BASIC,<74.708,22.947,-203>,<-0.809017,0.5877853,0>,<56.082,37.969,-8.099>
              HIT/BASIC,<61.292,18.587,-203>,<0.309017,0.9510565,0>,<54.922,23.488,-9.056>
            ENDMEAS/
CYL_24_11  =FEAT/CYLINDER,CARTESIAN,IN,LEAST_SQR,NO
            THEO/<65,30,-103>,<0,0,1>,24,200
            ACTL/<65.064,29.938,-5.561>,<-0.0065085,-0.0142661,0.9998771>,24.132,7.358
            CONSTR/CYLINDER,BF,CIR_24_11B,CIR_24_11T,,

And for the dimension:

24MM_HOLES =POSITION : CYL_24_1,CYL_24_2,CYL_24_3,...
            FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
            CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
            COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Current Alignment
            CUSTOMIZED DRF=NO
            STANDARDTYPE=ASME_Y14_5
              SIZE TOLERANCES/16,DIAMETER,24,0.5,0.15
              PRIMARY DIMENSION/POSITION,DIAMETER,1.7,MMC,<PZ>,<len>,A,B,MMC,<size>,C,MMC,<size>
              SECONDARY DIMENSION/<Dim>,<tol>,<MC>,<dat>,<dat>,<dat>
              NOTE/24MM_HOLES
            FEATURES/CYL_24_1,CYL_24_2,CYL_24_3,CYL_24_4,CYL_24_5,
                                   CYL_24_6,CYL_24_7,CYL_24_8,CYL_24_9,
                                   CYL_24_10,CYL_24_11,CYL_24_12,CYL_24_13,
                                   CYL_24_14,CYL_24_15,CYL_24_16,,

Current alignment is the same as FCF, not that that should matter either.

Reply

Numbers Game over 6 years ago

Code snippet for CYL_24_11:

CIR_24_11T =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<65,30,0>,<0,0,1>,24
            ACTL/<65.044,29.893,0>,<0,0,1>,24.161
            TARG/<65,30,0>,<0,0,1>
            START ANG=0,END ANG=360
            ANGLE VEC=<1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=5,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=0,SPACER=0
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<77,30,-3>,<-1,0,0>,<72.423,20.339,-2.931>
              HIT/BASIC,<68.708,41.413,-3>,<-0.309017,-0.9510565,0>,<76.475,33.777,-2.954>
              HIT/BASIC,<55.292,37.053,-3>,<0.809017,-0.5877853,0>,<66.822,41.871,-2.509>
              HIT/BASIC,<55.292,22.947,-3>,<0.809017,0.5877853,0>,<55.307,36.981,-2.494>
              HIT/BASIC,<68.708,18.587,-3>,<-0.309017,0.9510565,0>,<54.172,24.571,-2.029>
            ENDMEAS/
CIR_24_11B =FEAT/CONTACT/CIRCLE/DEFAULT,CARTESIAN,IN,LEAST_SQR
            THEO/<65,30,-206>,<0,0,-1>,24
            ACTL/<65.085,29.986,-206>,<0,0,-1>,24.103
            TARG/<65,30,-206>,<0,0,-1>
            START ANG=0,END ANG=360
            ANGLE VEC=<-1,0,0>
            DIRECTION=CCW
            SHOW FEATURE PARAMETERS=YES
              VOID DETECTION=NO
              REMEASURE=NO
              SURFACE=THICKNESS_NONE,0
              MEASURE MODE=NOMINALS
              RMEAS=NONE,NONE,NONE
              GRAPHICAL ANALYSIS=NO
              FEATURE LOCATOR=NO,NO,""
            SHOW CONTACT PARAMETERS=YES
              NUMHITS=5,DEPTH=3,PITCH=0
              SAMPLE METHOD=SAMPLE_HITS
              SAMPLE HITS=0,SPACER=0
              FIND HOLE=DISABLED,ONERROR=NO,READ POS=NO
            SHOW HITS=YES
              HIT/BASIC,<53,30,-203>,<1,0,0>,<72.111,20.2,-9.334>
              HIT/BASIC,<61.292,41.413,-203>,<0.309017,-0.9510565,0>,<77.032,31.523,-8.24>
              HIT/BASIC,<74.708,37.053,-203>,<-0.809017,-0.5877853,0>,<67.597,41.791,-8.941>
              HIT/BASIC,<74.708,22.947,-203>,<-0.809017,0.5877853,0>,<56.082,37.969,-8.099>
              HIT/BASIC,<61.292,18.587,-203>,<0.309017,0.9510565,0>,<54.922,23.488,-9.056>
            ENDMEAS/
CYL_24_11  =FEAT/CYLINDER,CARTESIAN,IN,LEAST_SQR,NO
            THEO/<65,30,-103>,<0,0,1>,24,200
            ACTL/<65.064,29.938,-5.561>,<-0.0065085,-0.0142661,0.9998771>,24.132,7.358
            CONSTR/CYLINDER,BF,CIR_24_11B,CIR_24_11T,,

And for the dimension:

24MM_HOLES =POSITION : CYL_24_1,CYL_24_2,CYL_24_3,...
            FEATCTRLFRAME/SHOWNOMS=NO,SHOWPARAMS=YES,SHOWEXPANDED=YES
            CADGRAPH=OFF,REPORTGRAPH=OFF,TEXT=OFF,MULT=10.00,ARROWDENSITY=100,OUTPUT=BOTH,UNITS=MM
            COMPOSITE=NO,FIT TO DATUMS=YES,DEV PERPEN CENTERLINE=ON,OUTPUT ALIGNMENT=Current Alignment
            CUSTOMIZED DRF=NO
            STANDARDTYPE=ASME_Y14_5
              SIZE TOLERANCES/16,DIAMETER,24,0.5,0.15
              PRIMARY DIMENSION/POSITION,DIAMETER,1.7,MMC,<PZ>,<len>,A,B,MMC,<size>,C,MMC,<size>
              SECONDARY DIMENSION/<Dim>,<tol>,<MC>,<dat>,<dat>,<dat>
              NOTE/24MM_HOLES
            FEATURES/CYL_24_1,CYL_24_2,CYL_24_3,CYL_24_4,CYL_24_5,
                                   CYL_24_6,CYL_24_7,CYL_24_8,CYL_24_9,
                                   CYL_24_10,CYL_24_11,CYL_24_12,CYL_24_13,
                                   CYL_24_14,CYL_24_15,CYL_24_16,,

Current alignment is the same as FCF, not that that should matter either.

Children

No Data