Hello ,
I had a measurement of the true situation with MMC.
the hole was oversize and PC-DMIS still gave the allowable bonus of MMC.
My question is, is it okay to add Bonus of MMC or LMC when hole is undersize or oversize?
Thanks
Some say no, as the feature is out of tolerance.
Personally, I think it should use the max amount of bonus if under/oversized because that will resemble the function of the part.
Some say no, as the feature is out of tolerance.
Personally, I think it should use the max amount of bonus if under/oversized because that will resemble the function of the part.