Please excuse my ignorance. Straight of the bat i am a quality op who has been side tracked into CMM work and on a very steep learning curve. Have working knowledge of dmis but not in anyway proficient. Now to my silly question. I have attached a image of the dim i am after. I am working n a OPTIV 321 WITH DMIS 2014_1. I have the diameter of the cir ok, but how do i get intersecting lines from the legs to pick up the 4.81 dim.
. Thanks in advance and forgive my ignorance.
Bluenowhere
I'm not at the cmm, but I think you can dimension the distance between line and circle, with the option "add radius" or something like this.
You can also do it with an assignment ASSIGN/V1=DIST1.MEAS + CIRC1.R (here, dist1.meas is the distance between the center of the circle and the line)
I'm not at the cmm, but I think you can dimension the distance between line and circle, with the option "add radius" or something like this.
You can also do it with an assignment ASSIGN/V1=DIST1.MEAS + CIRC1.R (here, dist1.meas is the distance between the center of the circle and the line)
. Thanks in advance and forgive my ignorance.
