Hello, my CMM is incapable to measure the small part (see attached images) and I was asked to research for a vision measurement system. A salesman presented me with Keyence IM series and I wonder if anyone can provide me the comparison between Keyence model with PCDMIS vision system. The capture 2 image contains dimension that I would like to measure.Thanks in advance.
It's been a little while, I may be wrong, but the Keyence is limited to FOV measurement, with a vision system you can get either manual or DCC motion. Some of those dimensions are going to be questionable with either system, though.
What size are your parts?
And as a minor aside, the dimensions in your print are incorrect. For metric dimensions, if the number is less than one it requires a leading zero, and the leading zero is not allowed for inch measurements less than one. The dimension listed as .46 ±.08 should be 0.46 ±0.08.
It's been a little while, I may be wrong, but the Keyence is limited to FOV measurement, with a vision system you can get either manual or DCC motion. Some of those dimensions are going to be questionable with either system, though.
What size are your parts?
And as a minor aside, the dimensions in your print are incorrect. For metric dimensions, if the number is less than one it requires a leading zero, and the leading zero is not allowed for inch measurements less than one. The dimension listed as .46 ±.08 should be 0.46 ±0.08.
