hexagon logo
Register Sign in
  • Replies 14 replies
  • Subscribers 14 subscribers
  • Views 238 views
  • Users 0 members are here
Options
Related

IJK problems with tactile and optics

sealevel
I'm at a new company so the Optiv Performance 443 is a new beast to me. Apparently this machine was a floor demo from Hexagon R.I. and was giving the last guy problems as well, but no one here remembers exactly what they were. Anyway, here's my problem....Every probe or camera I build is stuck with the same bad IJKs: <.45399> <.0005> <.89101>
I try to edit the IJK values in the probe utilities but the numbers won't stick.
Another annoyance is that the sliders to set the illumination value for top, bottom and ring lights are real funky. I move the slider up to 95 or so and get no light, then above that it turns everything full-blown white.
Any help or suggestions would be greatly appreciated!
edit: I should add am using 2015.1 sp10 and 2016 sp8.
Parents
  • Your camera vector should be 0,0,1. I would think you should be able to manually change this within the probe data. Your camera will never be at a 27° angle.

    Again, I am not at my Optiv machine right now to check out what my probe settings are.


    Update: Camera vector is 0,0,1. Try changing it. You may jack everything up and may need to recalibrate everything again, but then at least you have it correct. This may impact some programs...not entirely sure on that one.
Reply
  • Your camera vector should be 0,0,1. I would think you should be able to manually change this within the probe data. Your camera will never be at a 27° angle.

    Again, I am not at my Optiv machine right now to check out what my probe settings are.


    Update: Camera vector is 0,0,1. Try changing it. You may jack everything up and may need to recalibrate everything again, but then at least you have it correct. This may impact some programs...not entirely sure on that one.
Children
No Data
© 2024 Hexagon AB and/or its subsidiaries. Privacy Policy | Cloud Services Agreement