I am using an Optiv 543. Using the camera, I am trying to create a curve to use for a 2d profile. I managed to use auto profile 2d to measure a curve, but when I plug that curve into the line profile characteristic. I get no deviation, and there should be at least .001" Also the curve I did measure would have <50% point coverage on High. I would get 100% point coverage on Low.
UKCHAMP, I may be missing something here, but only until 2018R2 did they fix the 'Measurement Properties Closed' option. The NO or YES seemed to default to YES. I had several chats with Mr. Ryan about this. (he is Product Owner) Am guessing your intended scan is answered with a 'Yes'?
I cant really see your image very well, but here is an example which may or may not apply to your situation:
as (hopefully) you can see.... I have 'NO' selected. Meaning I can (hopefully) pick the desired Start-Direction-End points of my scan.
I still hold my breath with fingers crossed when using this... praying it doesn't break on me.
HTH
(edit: I used .dxf for example, but the 'open/closed' also works for me clicking on CAD as well)
UKCHAMP, I may be missing something here, but only until 2018R2 did they fix the 'Measurement Properties Closed' option. The NO or YES seemed to default to YES. I had several chats with Mr. Ryan about this. (he is Product Owner) Am guessing your intended scan is answered with a 'Yes'?
I cant really see your image very well, but here is an example which may or may not apply to your situation:
as (hopefully) you can see.... I have 'NO' selected. Meaning I can (hopefully) pick the desired Start-Direction-End points of my scan.
I still hold my breath with fingers crossed when using this... praying it doesn't break on me.
HTH
(edit: I used .dxf for example, but the 'open/closed' also works for me clicking on CAD as well)
