Thank JEFMAN Your alignment A2 is not correct (the origin is defined twice with different values) A1 : to move from 1pcs to other pcs A2 : for looping : define the peak off tooth. temporary loop number =4, if program ok, I will revise to 24 = number of teeth Circ4 should be a constructed circle from PNT1[1..4]. => I revised could you indicate on the picture who are circ1 and circ2 ? => already have in attachment file
Result is same, like picture spur.png
My mission is measure coaxiality of c1 and c2 for all pcs in picture capture.jpg => can you support
Coaxiality or Concentricity?
You should also try to level, rotate origin in your alignment.
Thank JEFMAN Your alignment A2 is not correct (the origin is defined twice with different values) A1 : to move from 1pcs to other pcs A2 : for looping : define the peak off tooth. temporary loop number =4, if program ok, I will revise to 24 = number of teeth Circ4 should be a constructed circle from PNT1[1..4]. => I revised could you indicate on the picture who are circ1 and circ2 ? => already have in attachment file
Result is same, like picture spur.png
My mission is measure coaxiality of c1 and c2 for all pcs in picture capture.jpg => can you support
Coaxiality or Concentricity?
You should also try to level, rotate origin in your alignment.
