.
.
I create a new topic because the previous title was SP1, so this one is only 2019 R2, and be able to have a long life
2019 R2 SP2 :
During the optical calibration, you have to center the camera on concentric circles (Hexagon glass artifact).
The focus is mesured, and at the end, the cmm doesn't move to the focus position : is it a new parameter ?
During the optical calbration, the cmm moves in x and y at a very very slow speed (about 0.25 mm / s), it looks like the focus speed.
Is there a setting to change it ?
That's all for about 1 hour of tests, the rotar turns
Happy week-end, all !
I create a new topic because the previous title was SP1, so this one is only 2019 R2, and be able to have a long life
2019 R2 SP2 :
During the optical calibration, you have to center the camera on concentric circles (Hexagon glass artifact).
The focus is mesured, and at the end, the cmm doesn't move to the focus position : is it a new parameter ?
During the optical calbration, the cmm moves in x and y at a very very slow speed (about 0.25 mm / s), it looks like the focus speed.
Is there a setting to change it ?
That's all for about 1 hour of tests, the rotary turns
Happy week-end, all !
