Is it all possible to set settings somewhere in PC DMIS to be able to see your scan line along with the upper / lower tolerance. I have a customer that is requesting a printout of the scan form for a die and they want to see our scan with the upper and lower tolerance line also showing. ALL three must be visible.
In the dimension, turn on the GRAPH. It should show all that.
Of course, it might be hard to see, so you can use a multiplier, both the deviation and the tolerance band will be multiplied so you can see it all easier.
In the dimension, turn on the GRAPH. It should show all that.
Of course, it might be hard to see, so you can use a multiplier, both the deviation and the tolerance band will be multiplied so you can see it all easier.