Is it all possible to set settings somewhere in PC DMIS to be able to see your scan line along with the upper / lower tolerance. I have a customer that is requesting a printout of the scan form for a die and they want to see our scan with the upper and lower tolerance line also showing. ALL three must be visible.
Will I have to create two separate profiles @ .0002 for a total tolerance of .0004. I tried it and I am only getting two lines, 1 the scan and 2 one of the tolerances. Not getting all three
Will I have to create two separate profiles @ .0002 for a total tolerance of .0004. I tried it and I am only getting two lines, 1 the scan and 2 one of the tolerances. Not getting all three